How do I program a Philips universal remote CL034?
How do I program a Philips universal remote CL034?
How to Program a Philips CL034 Universal Remote
- Find the code for the device you wish to program the remote to.
- Turn on the component and point the remote at it.
- Press the button for the desired device (“TV”, “VCR/DVD” or SAT/CBL”).
- Enter the four-digit code.
What are the codes for a Philips universal remote?
Remotes for TV
| TV Brand | Philips Universal Remote Code |
|---|---|
| PHILIPS | 0807, 0022, 0020, 0422, 0122, 0222, 0322, 0002, 0520, 0919, 0521, 0621, 0430, 0247, 0901, 0402, 0408, 0109, 0210, 0310, 0715 |
| PHILIPS-MAGNAVOX | 0807, 0022, 0322, 0919, 0224, 0430 |
| PILOT | 0002 |
| PIONEER | 0120, 0719, 0808, 0002, 0502, 0610, 0519 |
Why is my Philips universal remote not working?
If the TV does not respond, the remote control may be low in battery power and you need to replace the battery. 2) Ensure that the battery of the remote control is inserted according to the illustration inside the battery compartment. 3) After replacing the battery, randomly test some functions of the remote control.
How do I reset my Philips universal remote?
How to reset the Philips TV remote control to factory setting…
- Put the remote in ‘Erase mode’ Starting condition is ‘TV’ mode. Press simultaneously ‘OK’ + ‘MUTE’ key for 5 seconds.
- Select the desired mode to be erased. With the SELECT button you can select the wanted mode to be deleted.
- Confirmation.
How do you reprogram a universal remote?
Here is an example of likely steps:
- Turn on your TV or another device you wish to control.
- Press and release the DEVICE button on your remote associated with the product you want to control (TV, etc.).
- Press the Device Button again, as well as the POWER button at the same time.
- Release both buttons.
How do you reset a Philips remote?
Why is my TV not responding to the remote?
A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.
Where is the Setup button on the Philips universal remote?
If there is, you have a slightly older version of the remote. Point your remote at your device and press the setup button. Hold it down for 5 seconds. Once the red LED light near the top comes on, release the setup button.
How do you find your 4 digit code on your TV?
Check the User’s Manual of your remote control to locate the code section. The list of codes for the remotes on the manual differs. Some of the codes are on the manual, while some are written on a piece of paper that comes with the manual. Locate the code and try it out to find the one that matches your Tv remote.
How to set up Philips Universal Remote?
Check to see if the Philips remote is compatible with your device. Your Philips universal remote can be synchronized…
How do I program a Philips Universal Remote?
Point the Philips remote at the device you want programmed, then press and hold the “Setup” or “Code Search” buttons on your Philips remote. Release the “Setup” or “Code Search” button when the red indicator light starts blinking. Press the device button for the device you’re programming with the remote.
How to program a Philips Universal Remote Control?
Hold down the “Code Search” button on the remote control. Release the button after the red indicator light blinks.
What are the codes for Philips Universal Remote?
Philips Magnavox televisions do not have a single universal remote code. The universal remote codes for this type of television are 002, 009, 109, 202, 209, 210, 310, 402, 408, 508, 510, 807, 901, 914 and 917.
