Common questions

How do I reset my Lexmark PC?

author 0

How do I reset my Lexmark PC?

After installing the new photoconductor unit, make sure the printer is powered on and then open the front cover. With the front cover open, press and hold the stop/cancel (X) button. Once all the printer lights begin flashing or your LCD screen says “Resetting PC Counter,” let go of the button.

What does it mean to replace PC Kit on a Lexmark printer?

Overview. The printer posts a Replace PC Kit message when the photoconductor cartridge is down to its last 10% of life (or after the equivalent of 72,000 drum rotations). Once the photoconductor reaches 0%, the printer will stop operating and a new message of Replace PC Kit to Continue will appear on the printer screen …

How do I reset my Lexmark e350d?

Power off the printer. On the printer’s operator panel, press and hold the select button ( ) and the back button ( ). Power the printer back on while keeping both these buttons held down.

Why does my printer say PC Life Warning?

A Photoconductor (PC) Life Warning or an 84 – PC Kit life message indicates that the photoconductor unit is near the end of its functional life and should be replaced soon. The recommended action is to replace the photoconductor unit or have an extra one in stock.

What does PC life warning mean on Lexmark printer?

How do I reset my Lexmark x464 PC?

After installing the new pc unit and restarting the machine, leave the printer powered on and open its front cover. With the front cover open, press and hold the stop/cancel ( ) button. Watch the LCD screen. When you see the message “Resetting PC Counter”, let go of the button.

What is PC Life Warning?

Solution. Note: The term PC in both variations of this message code refers to the photoconductor unit. If the message is 84 PC Life Warning, the photoconductor is near the end of its functional life but may still be used for a time, assuming the print quality is acceptable.

How do I change the Lexmark photoconductor?

Replacing a photoconductor unit

  1. Open door A.
  2. Remove the waste toner bottle.
  3. Remove the imaging unit.
  4. Remove the photoconductor unit.
  5. Unpack the new photoconductor unit, and then remove the packing material.
  6. Insert the new photoconductor unit.
  7. Insert the imaging unit.
  8. Insert the waste toner bottle.

How do you reset the maintenance light on a Lexmark cx410de?

Resetting the maintenance counter

  1. From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters.
  2. Select Fuser Reset or ITM Reset.

How do I reset my Lexmark printer password?

Please contact Lexmark Technical Support for additional assistance….Solution.

Step Action
1 Power the MFP off.
2 Press and hold the OK button on the printer control panel.
3 Power the MFP on, and keep the OK button held down until you see Ready on the display. The password is now reset to the default of 00000.

author

Back to Top