How do I reset my Lutron RA2 main repeater?

How do I reset my Lutron RA2 main repeater?

Step 1: Quickly triple tap and hold any button on the keypad. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until all the status LEDs start to flash slowly (approximately once per second). The keypad has now been returned to Factory Default Settings.

How do I program my RadioRA 2?

To set up a RadioRA® 2 system, components must be added to the Main Repeater. First, add Auxiliary Repeater(s)*; then add all other system devices. Press and hold the Add button on the Main Repeater for 3 seconds until the green Add LED begins to rapid-flash (ten times per second) and the Repeater beeps.

How many devices can a single RadioRA 2 main repeater support?

Using two Main Repeaters in RadioRA 2 allows for systems that can scale as large as 200 devices. The inclusive software is required for commissioning a two Main Repeater system.

What is an auxiliary repeater?

Auxiliary Repeater. Auxiliary repeater extends system RF range in larger applications, outdoor spaces, and between buildings. Can be used wirelessly within the home or be wired. to another repeater to span longer distances. System repeaters are required for system setup and operation.

Can’t connect to Lutron bridge?

All Users: If you are still unable to connect, we recommend that you reset your router by disconnecting the power for 10 seconds. This will restart the bridge. If the Lutron App is still unable to find the bridge, this is most likely because the Bridge and your smart device are not connected to the same network.

What is a bridge main repeater processor?

RR-CONNECT-PKG. Package containing: Radio RA2 120 V main repeater with astronomic timeclock. RS232 and ethernet ports.

What is a bridge main repeater?

The RA2 Select main repeater allows for setup, control, and monitoring of select RadioRA 2 devices and Lutron wireless shades from a smartphone or tablet using the Lutron App. The Lutron Connect Bridge creates a link between a RadioRA 2 or HomeWorks QS system and the Lutron cloud, enabling remote access to your system.

What is the maximum specified RF range from a main repeater to an auxiliary repeater?

30 ft
For systems that extend up to 30 ft (9 m), one (1) Main Repeater is required to set up the system. Up to four (4) Auxiliary Repeaters can be added to extend the RF range for larger system applications. Each Repeater has an RF range of 30 ft (9 m), covering a total area of approximately 2500 ft2 (232 m2).

What is Ham radio Ctcss?

In telecommunications, Continuous Tone-Coded Squelch System or CTCSS is one type of in-band signaling that is used to reduce the annoyance of listening to other users on a shared two-way radio communications channel. It is sometimes referred to as tone squelch.

How do I program the main repeater in radiora 2?

If the system is to be software-programmed, use the “Find Main Repeater” tool in the RadioRA 2 software. For walkaround-programming, enter Add Mode on the Main Repeater (press and hold “Add” button), activate any system devices, and exit Add Mode (press and hold “Add” button again). The Main Repeater is in “Safe Mode” mode.

How do reservations work with Lutron repeaters?

Reservations won’t help you, the Lutron devices will still use multicast. If they are static, they simply connect to the IP.You may have to initially set up your main repeater on a junk router of your own that’s on the same IP range, just to set the static.

How do I view messages in the Lutron support community forums?

To start viewing messages, select the forum that you want to visit from the selections below. Make sure to read the Terms of Use before using the Lutron Support Community Forums. The RadioRA 2 Main Repeater can indicate various states to the user through specific blinking patterns of its LED’s.

How do I register for the Lutron support community forums?

In order to reply to a post or start a new thread, you will need to register: click the Register link above to proceed. To start viewing messages, select the forum that you want to visit from the selections below. Make sure to read the Terms of Use before using the Lutron Support Community Forums.

https://www.youtube.com/watch?v=VqpSDov4UQI