Other

How do I reset my Oki toner?

author 0

How do I reset my Oki toner?

Action:

  1. Press Menu = printer displays “Paper Menu”
  2. Press Next 4x = printer displays “System Menu”
  3. Press Select 1x = printer displays “Factory Defaults”
  4. Press Next 7x = printer displays “Reset Toner Life”
  5. Press Select 1x = printer displays “Resetting Toner Page Count”
  6. Press Ready.

How do I reset my toner counter?

Reset process

  1. Switch-off the printer.
  2. Press and hold the on/off button.
  3. When all the LEDs turn on, open the cover and remove the toner cartridge + drum unit.
  4. Release the on/off button.
  5. Re-install the toner cartridge + drum unit back into the printer and close the printer cover.

How do I reset my Oki drum counter?

ANSWER

  1. Start the Status Monitor for the printer.
  2. Click on Printer Setup tab – Printer Menu button – Maintenance 1 tab.
  3. Click the [Reset] button next to Drum Counter, then click on the [OK] button to reset the drum counter.

How do I reset my Oki B4600 printer?

How to Reset an Okidata B4600 Toner

  1. Press the “Menu” button repeatedly to scroll through the menu options.
  2. Press the “Item” button repeatedly until “Drum Counter Reset” displays on the screen.
  3. Press “Select” to reset the counter, and then press “Online” to return to the operating mode.

How do I open an OKI toner cartridge?

Toner powder may spill if you remove a toner cartridge before the toner runs out.

  1. Prepare new toner cartridges.
  2. Open the scanner unit.
  3. Press the top cover open button.
  4. Open the top cover.
  5. Rotate the blue lever of the toner cartridge in the direction of the (Unlock) arrow until it stops.

How do I reset my Oki c332?

How do I restore printer settings to default?

  1. Press the. button a few times to display [MAINTENANCE MENU].
  2. Press the “OK” button.
  3. Confirm that [MENU RESET/EXECUTE] is displayed. If other than [MENU RESET/EXECUTE] is displayed, press the or. button a few times to display [MENU RESET/EXECUTE].
  4. Press the “OK” button.

How do you reset waste toner box error?

To clear the message ‘Replace WT Box’ from the LCD display, power off the printer using the power switch on the right side of the printer. Wait 5 seconds and then power the printer back on. If the printer continues to display the message ‘Replace WT box’, the waste toner box is full and needs to be replaced.

How do you reset the toner on a Brother 2300?

Brother HL-L2300D Toner Reset

  1. Press and Hold the Power button until the machine turns off.
  2. Open the Toner Door.
  3. Press and Hold the Go button until step 5.
  4. Press the Power button.
  5. Release the Go button when the Toner, Paper, and Drum lights are lit.
  6. Press the Go button 9 times.

How do you reset a drum?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

How do I reset my Oki mc363 printer?

How do I get my printer to accept compatible cartridges?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

author

Back to Top