How do I reset my Scala Rider Q2?
How do I reset my Scala Rider Q2?
RESET INTERCOM PAIRING With the scala rider Q2 PRO headset turned ON, press and hold the CTRL Button for at least six seconds until the Red and Blue Lights begin rapidly alternating.
How do I pair my Scala Rider?
Check the scala rider is in Standby (single BLUE flash every 3 seconds). 3. To pair Bluetooth Channel 1 – press “V+” for at least 5 seconds until the RED and BLUE LEDs begin rapidly alternating. To pair Bluetooth Channel 2 – press “V-” for at least 5 seconds until the RED and BLUE LEDs begin rapidly alternating.
How do I connect Cardo to Cardo?
On the other Cardo unit, activate Bluetooth intercom pairing mode (see the other Cardo unit user manual at cardosystems.com/product-manuals/). The unit confirms that pairing has succeeded and the LED flashes for 2 seconds. To cancel the pairing process, press for 2 seconds. The LED stops flashing.
Does the Cardo Scala-rider Q2 provide a Bluetooth headset?
The Cardo scala-rider Q2 provides a Bluetooth headset for mobile phone communications, supporting headset and hands-free profiles with rider to passenger communications with other Q2 intercoms up to 500 m.
How to bypass the Cardo smart Dashboard system?
For all others, bypass the smart dashboard system by connecting both phone and the bike system directly to the Cardo unit (one on each channel) without connecting the phone to the bike system. How to use with a Smartwatch? Try turning it off before starting the app, and only then turn the smartwatch back on.
How to use Cardo with a smartphone?
Connect your smartphone to both the bike system and the Cardo unit directly. 2. For all others, bypass the smart dashboard system by connecting both phone and the bike system directly to the Cardo unit (one on each channel) without connecting the phone to the bike system. How to use with a Smartwatch?
What should I do if the Cardo updater stops during firmware upgrade?
If at any time during the firmware upgrade, the Cardo updater stops, this would result in a code #D02 error. Should that happen, proceed with the following 1. Disconnect the unit from the computer 2. Wait 5 seconds and reconnect it 3.
