Other

How do I reset my ZoneDirector 1100?

author 0

How do I reset my ZoneDirector 1100?

To pin reset your ZoneDirector to factory default configuration, using a straightened paperclip, press and hold the RESET button for 8 – 10 seconds then release. NOTE: Pin resetting the ZoneDirector will erase ALL configuration settings.

How do I connect my router to my Ruckus switch?

First Steps

  1. Check the Ruckus switch (the large white box at the bottom of your control panel) for any physical defects and ensure there is power flowing to the device.
  2. Ensure the Ethernet cable that is running from the Gateway (modem) is plugged into the Ruckus switch in Port 3 (located on the top of the Switch).

How do I reset my ruckus ZoneDirector 1200?

To reset ZoneDirector to factory default settings, press and hold the F/D button for at least five (5) seconds.

How do I add a new AP to my Ruckus controller?

Connect the AP that you want to add to Ruckus Cloud Wi-Fi to a network that is connected to the Internet, and then plug it into a power source to power it on. On the Dashboard, click Add AP.

How do I upgrade my ZoneDirector?

– Login to the ZD and go to the Administer > Upgrade page. – Click on the “Choose File” and browse the downloaded firmware file. – ZD will prompt you to backup the current configuration. – If you don’t have the most latest backup, say “Yes” to this before proceeding with ZoneDirector upgrade.

How do you set the SSID on a ruckus controller?

Editing WLAN SSID

  1. From the list of devices, select the Unleashed network for which you want to edit the WLAN SSID, then click Edit WLAN.
  2. Select the ESSID from the drop-down list.
  3. In NewESSID/Name, enter the name of the WLAN.
  4. In New Passphrase, provide the password of the WLAN.
  5. Click Save.

Is Ruckus Wi-Fi worthwhile?

NEW YORK (TheStreet) — The Ruckus Wireless (RKUS) ZoneFlex 7982 is a super-high capacity, three-stream, 802.11n, smart Wi-Fi box that is the best Wi-Fi access point money can buy. Although it’s very expensive, it’s worth every penny. Its only output is via Wi-Fi.

How do I upgrade my ZoneDirector software?

NOTE: ZoneDirector software upgrade is available only to the Premium Support or Software Upgrade Support customers with valid login credentials. If you are a Premium Support or Software Upgrade Support Customer, you can create a login credential Here.

Do zonedirectors have STP support?

Only necessary if both Eth ports of ZoneDirectors are connected to switch (es), ZDs do have STP support. The attached guide helps convert a ZD managed AP for use on Ruckus Cloud Wi-Fi.

Is the ZoneDirector registered on the zf2741?

The zonedirector is registered on the… (continued) I have a ZoneDirector 1100, 4 Zoneflex 7363 and one ZoneFlex 2741. 2 Zoneflex 7363 are Root AP as is the ZF 2741. I am trying to mesh one ZF7363 to the ZF2741 but it does not see it… (continued)

What is the recommended release number for ZoneDirector 7962?

Please read the Release Notes before deploying any new ZoneDirector software. Customers with 7962/7762/7025 model AP recommended release is 9.8.3.0.58, found Here. A CLI command to shutdown the ZD.

https://www.youtube.com/watch?v=Wq-4w2ce1vA

author

Back to Top