Useful tips

How do I set the time on my Amano PIX 10?

author 0

How do I set the time on my Amano PIX 10?

To set the print style and time, use a code chosen from the list.

  1. To Enter the Code. a. Press and hold the RESET button on the bottom of the clock.
  2. Set the Time. When setting the time you must use 24 hour format (i.e. 13:00 = 1:00 pm).
  3. The PIX-10 is ready for use!

How do I change the date on my Amano clock?

The date flashes.

  1. 6 www.amano.com/time  1-800-253-9836.
  2. Press the CHANGE button until the date shows the correct.
  3. date for the beginning date for the DST.
  4. Press ENTER.
  5. Press the CHANGE button until the month shows the correct.
  6. month for the beginning month for the DST modification.
  7. Press ENTER.

How do I change the date and time on my Amano PIX 95?

Setting the Year, Month and Date (If Incorrect) 1. Press and hold the PROGRAM button until appears, then press the CHANGE button to select , then press the ENTER button. 2. Press the CHANGE button to select correct YEAR, then press the ENTER button.

How do you change the time on Amano PIX 21?

1. When the display flashes P2 CLoc, press the ENTER button. 2. Press the CHANGE button to choose 12 hour AM/PM display or 24 hour military time, then press the ENTER button.

How do I set the time on my pix-10 clock?

Plug in the power cord. 2. Insert a piece of paper or time card into the PIX-10. The clock will automatically print YEAR, MONTH, DATE and TIME with AM or PM (in Pacific Time). When the display flashes all four digits, tap the l right button again.

How do I set the hour and minute on my Clock?

Tap the “Change” button to set the hour (the hour display will flash). The machine’s internal clock uses the 24-hour format; so if you want to set it to 3:00 p.m., press “Change” until the display reaches “15.” Tap the “Enter” button to set the hour. Tap the “Change” button to set the minute.

How do I change to P2 CLOC on the pix-10?

Familiarize yourself with the PIX-10’s buttons. The button on the left (with the arrow) is the “Change” button. The button on the right (with the dot) is the “Enter” button. Press the “Enter” button when the display shows “P2 Cloc.”

How do I replace the ribbon spacer on my Amano printer?

1. Lift the printer block and remove the spacer. Amano Cincinnati, Inc. Page 4 Lift the cover to remove. 3. Remove the spacer between the Ribbon Cartridge and the Printer Carriage. 4. Re-install the cover.

author

Back to Top