How do I test my Harley Davidson TSM?
How do I test my Harley Davidson TSM?
To diagnose the TSM/TSSM observe the behavior of the turn signals.
- Set Run switch to Run – –
- Turn Ignition key On-Off-On-Off-On-Off-On and then toggle the Left Turn Signal switch twice. – –
- Turn Ignition key Off-On Verify the Check Engine lamp and Security Lamp illuminate briefly and then turn off.
What is a TSM on a Harley?
The turn signal module (TSM) has two major. functions: ● Control turn signals. ●
What is a Tssm?
Definition. TSSM. Two-Spotted Spider Mite.
What is a Harley Tssm?
08-2016TECH. This Bulletin covers the TSSM (Turn Signal Security Module) reset procedure for 2001 and new non-canbus Harley-Davidson Models (with alarm) which should be completed when the turn signals are flashing rapidly with the Signal Stabilizer installed correctly.
What is the Tssm on a Harley Davidson?
This Bulletin covers the TSSM (Turn Signal Security Module) reset procedure for 2001 and new non-canbus Harley-Davidson Models (with alarm) which should be completed when the turn signals are flashing rapidly with the Signal Stabilizer installed correctly.
How do I reset my Harley Davidson security system?
Press the right turn signal one time and release. The turn signal should flash three times. The current PIN number should appear in the odometer. The first digit will be flashing.
How long does Harley alarm go off?
If you’ve got a Harley-Davidson equipped with a security system, your motorcycle’s motion sensors are going to trigger the alarm when it senses that it’s being moved. After 600 miles or so in the back of that trailer, all those blinking lights will have run your battery dry.
How do I start my Harley with PIN code?
Press and hold the left turn signal until you see “Enter PIN” flash on the speedometer. Using the left turn signal to cycle through the digits and the right turn signal to select and move onto the next slot, you enter your personalized five-digit PIN and your bike will start.
Why is my alarm going off on my Harley?
If you’ve got a Harley-Davidson equipped with a security system, your motorcycle’s motion sensors are going to trigger the alarm when it senses that it’s being moved. So other activity, such as attempting to start the engine with your fob out of range will still trigger your alarm.
Can you put a TSSM on a stolen Harley Davidson?
You can’t do that. If it would be that easy you’d hear of a lot of stolen Harleys !!! Even if you would carry a TSSM instead of a TSM with you the new TSSM has to be married to the ECM using the H-D Digital Tech computer.
How do I replace the TSSM on my bike?
Find the TSSM under the seat of your bike, remove the clip, and lift it out. There will be TWO connectors plugged in to it; remove both. Note that one of the plugs is larger than the other – this is the input, ECM, and turn signal connector – we will use this again.
Can I carry a TSSM instead of a TSM?
Even if you would carry a TSSM instead of a TSM with you the new TSSM has to be married to the ECM using the H-D Digital Tech computer. Just what is the item being asked about??
Can I replace my ECU with a TSM?
The marriage has to be disolved and then another unit can be placed, and either married to the ECU again, (TSSM) or a TSM can be installed. If you had an ECU from another identical bike, and a plain TSM, then you could elimiate the dealer trip. Not if you use your current ECU.
