How do I tune my Sky Magic Eye?
How do I tune my Sky Magic Eye?
Run the aerial cable from your Sky box to your second TV, and plug the other end into your tvLink. Plug your tvLink into the second TV’s aerial socket. Position your tvLink’s magic eye (the part that looks like a computer mouse) with a clear line of sight to your Sky remote.
Why is my Sky Magic Eye not working?
Re: Magic eye suddenly not working The most likely cause is poorly fitted plugs at one or both ends of the coax cable which runs from your Sky box to the TV upstairs. You can check that the magic eye isn’t faulty by plugging it directly into the rf2 socket to see if it then !
How do I retune my Sky box?
How to manually retune your Sky box
- Go to “Home”, “settings”, then scroll down to “manual tuning”.
- (You may need to enter your Sky Q PIN at this stage.)
- You will need to enter the tuning parameters such as frequency, polarisation and Symbol Rate and then save the newly added channels.
How do I install dstv eye link?
When a TV link is plugged in and it does not want to power-on or function properly, the steps below should be followed.
- Press menu button.
- Select advanced option.
- Enter the pin 9949.
- Select equipment setup.
- Select no.3 on the menu (TV Link/Auxiliary)
- There will be two options on/off, this option must be set to on.
How can I get Sky in another room without cables?
Option 2: Connect your Sky Digibox to a second TV wirelessly With this option, you don’t need to run cables. Get a Wireless Video Sender kit, which has a transmitter and receiver. These connect to a spare SCART socket on your Sky box, and a SCART socket on your second TV set.
How do I manually tune a Sky channel?
Press the Home button on your Sky remote, scroll down to Settings, then Manual tuning and then Add a channel. Enter the Frequency, Polarisation, Symbol rate and FEC for the channel.
How do I tune my Sky box to Freeview?
How do I retune my TV?
- Press menu on your box or TV remote control.
- Select set up, installation, update, or a similar option.
- Select first-time installation (sometimes called factory reset, full retune or default settings).
How do I reset my DSTV eye?
Reset DStv remote
- Hold down both the ARC and Standby for about 3 seconds. During this step, the remote lights should change to amber.
- Continue holding the ARC button as you release the Standby.
- While you are still pressing the ARC button, dial 9499.
- Now, release the ARC button to complete the reset process.
How do I install magic eye on my Sky Box?
How to install Magic Eye with IO link. Turn off the power to your Sky box. Plug iO Link into iO port on the back of your box. Connect the iO Link to the TV Link using the coaxial cable. Turn the power back on. (Wait 3-4 mins before trying to take your Sky box out of standby)
How do I use my magic eye to pick up remote commands?
The red power light on TV Link will now be lit and your Magic eye should be clearly visible in order to pick up remote commands. Make sure your Sky box is switched ON and tuned to a channel. Tune your TV so it picks up your Sky picture.
How do I connect My Sky Box to my TV?
1- Connect your coaxial cable to the RF2 output on your Sky box. If your Sky box does not have an RF2 output you will need to purchase an i/0 link modulator or an external modulator to connect to your Sky box. 2- Install the coaxial cable to the second room where you wish to view your Sky box. 3- Fit your remote eye and connect to your TV.
How do I enable RF output on my Sky TV?
Check your TV’s manual or the manufacturer’s website for more information. Press services on your Sky remote, select Settings and then make sure HDMI Control is ON. Highlight HDMI Control via RF Output and switch the setting ON.
