How do I unlock my Whirlpool control lock?
How do I unlock my Whirlpool control lock?
When you are ready to resume use of the washer, you must first unlock the control panel.
- Locate the “Control Lock/Unlock” button on your Duet’s control panel.
- Press and hold the “Control Lock/Unlock” button for three seconds.
- Release the “Control Lock/Unlock” button when the control lock icon on the display disappears.
What do I do when my Whirlpool washer Says control locked?
Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off. If that does not do it, try putting the machine into diagnostic mode. The washer must be empty and the control must be in the OFF state before pressing the touch-pad sequence to start the test.
How do I unlock my Whirlpool Digital washer?
Hold down the “Control Lock” button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
What does it mean when your Whirlpool Dryer says control locked?
The control lock is a safety feature designed to stop children from accidentally turning the dryer on. It can typically be turned off by holding down the control lock button. In other models of dryer you need to swipe the lock away on the touchscreen.
How do you unlock the control panel on a Whirlpool stove?
Press and hold on to the lock for 3 seconds to lock the control panel. The light above the lock will turn on. Press and hold LOCK for 3 seconds to open the control panel.
Why does my washer say control locked?
The Control Lock feature on Front Load Washers can prevent any selections from being made when activated. The controls can be locked or unlocked after a cycle has started.
What does Control Lock mean on Whirlpool washing machine?
When activated, the Control Lock feature on Front Load Washers can prevent selections from being made. After a cycle has begun, the controls can be locked or unlocked. Children can’t accidentally start the washer by touching the pads.
How do you unlock a dryer control?
To lock and unlock the dryer controls: Press and hold the Extended Tumble and – (minus) buttons for 3 seconds. The control lock icon will flash while locking/unlocking, stay on when locked, and turn off when unlocked. NOTE: The Power button can still be used when the machine is locked.
How do you unlock the controls on a Whirlpool oven?
How do you gain access to the controls on an oven? Press and hold on to the lock for 3 seconds to lock the control panel. The light above the lock will turn on. Press and hold LOCK for 3 seconds to open the control panel.
How do I turn off the control lock on my stove?
Press and hold the Gas/Control Lockout pad for 3 seconds to lock or unlock the control. The Clear/Off pad is always active, even when the control is locked.
