How do I use the One Touch Ultra Meter?
How do I use the One Touch Ultra Meter?
Use each test strip immediately after removing it from the vial. Insert the test strip into the test port as shown, with the three contact bars facing you. Push the test strip in as far as it will go. After the black start-up screen appears, the meter will display the code from your last test.
Why was the One Touch Ultra discontinued?
Last updated on Dec 3, 2018. LifeScan has discontinued the manufacturing the OneTouch Ultra and OneTouch UltraSmart Meters, effective December 31, 2012. This action was taken due to a shift in demand from these products to the newer OneTouch Brand Blood Glucose Meters and not the result of any safety issues.
What is Error 2 on One Touch Ultra Mini?
Error 2. What it means: Error message could be caused either by a used test strip or a problem with the meter or test strip. What to do: Repeat the test with a new test strip.
What is error 5 on One Touch Ultra Mini?
CAUTION: You may get an ERROR 5 message or an inaccurate result if the blood sample does not fill the confirmation window completely. See Troubleshooting in Section E. Discard the test strip and re-start the test process.
How do I use my OneTouch® UltraMini® Meter?
Use only OneTouch® Ultra® Test Strips with your OneTouch® UltraMini® Meter. Make sure your meter and test strips are about the same temperature before you test. Testing must be done within the operating temperature range (43–111°F). For the most accurate results, try to test as close to room temperature (68–77°F) as you can.
What is included in the one touch ultra mini package?
In addition to the One Touch Ultra Mini blood glucose monitoring system, you will find a lancing device, the control solution, a small number of lancets, a few test strips, a clear cap for testing on your arm, carrying case, log book, batteries, owner’s book and quick start and reference guides.
How do I use the one touch ultra mini blood test?
Take a test strip from the bottle and place it in the One Touch Ultra Mini. Make sure the code that appears matches the bottle of strips you are using. Take your lancet device and prick your finger. Place the blood on the open end of the test strip until it is full and the countdown begins.
How do I use the OneTouch® Ultra® test strips?
Hold the meter as shown and insert the test strip into the test port. Make sure the three contact bars are facing you. Push the test strip in as far as it will go. Do Not bend the test strip. CAUTION: OneTouch® Ultra® Test Strips are for single use only. Never re-use a test strip that had either blood or control solution applied to it.
