How do you apply crystalline waterproofing?
How do you apply crystalline waterproofing?
Installation is straightforward and can be done by any do-it-yourself homeowner.
- Clean Concrete Wall Surface.
- Repair Concrete Surface.
- Wet Surface of Concrete with Water.
- Mix Waterproofing Material.
- Apply Waterproofing Material to Concrete Wall.
- Keep Wall Wet While Applying Material.
- Sprinkle Over New Concrete Pours.
How do you apply Thoroseal waterproofing?
Brush it On Start at the top and work down. Use a tampico fiber brush to apply Super Thoroseal® in a thick coat, working the mixture into the pores of the surface for a good penetrating seal. Double back and use the brush to smooth out the material. Allow 12 hours between coats for drying time.
How do you use Sika waterproof coating?
Spray Application: Use wet spray equipment to apply the first and second coats of Sika® Damp Proofing Slurry ensuring the first coat has hardened sufficiently to prevent damage from the second spray application. Smooth second coat using brush or trowel. For all applications apply second coat at 90o to the first coat.
Does xypex really work?
Yes. By blocking the intrusion of water into concrete, Xypex helps protect the concrete from the damaging effect of repeated freeze/thaw cycles. Yes. By preventing the intrusion of water, salt water, sewage, and most chemicals, Xypex helps protect reinforcing steel against oxidation and deterioration.
What is crystalline waterproofing used for?
Crystalline waterproofing products can be used on concrete structures that are designed for the containment of potable water. Here is a partial list of waterproofing applications these products are commonly used on: Waterproofing of foundations, slabs, and walls.
Is Drylok better than Thoroseal?
Drylok is comparatively lighter and the quality isn’t as great as Thoroseal. It’s also less durable than Thoroseal. So, the properties and quality of Drylok make it suitable for DIY projects. Their difference in quality makes Thoroseal more suitable for commercial purposes.
Can I put Thoroseal over paint?
Super Thoroseal is suitable for a variety of waterproofing applications, including above and below grade concrete and masonry waterproofing. It cannot be applied to painted surfaces.
How long does Sika waterproofing take to dry?
Applied Product Ready for Use
| Touch dry | Rain resistant | Full cure |
|---|---|---|
| 2 hour approx. | 8 hours approx. | 4 days approx. |
| 1 hour approx. | 4 hours approx. | 2 days approx. |
How much xypex is in a yard of concrete?
1.25 – 1.50 lb per sq. yd.
Can you use Drylok on wet walls?
DryLok is a useful coating which can be painted onto wet basement walls to protect them from damage. It is available in powdered form and ready mixed, which can simply be painted straight onto the wall. DryLok is not only suitable for wet basements, but it’s also commonly used in birdbaths and fish ponds.
