How do you bleed power trim and tilt Mercury?
How do you bleed power trim and tilt Mercury?
Bleeding: OB tilt/trim units are “self-bleeding” and you should always perform these “purge cycles” even if you don’t need to add any more fluid. To purge/check, remove the tilt lock (if engaged) and cycle the OB down by “jogging” it down, in 3 second bursts. Then rest the motor about 15 seconds.
How do you manually trim an inboard motor?
Reach to the back of the engine housing to the back transom — the very back edge of the boat. Look for two metal pins connecting the shaft to the trim-motor. Use an adjustable wrench to unscrew the pins from the trim motor, preparing the shaft-propeller to be raised manually. Leave the cowling open.
How fast will a 60 horsepower boat motor go?
16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.
How much does a 60 horsepower Mercury outboard weigh?
Specifications – 60 EFI
HP / kW | 60 / 45 |
---|---|
Dry weight *Lightest model available | 247 lbs / 112 kg |
CARB star rating | 3 |
Bore and stroke | 2.56 x 2.95″ / 65 x 75 mm |
Ignition | ECM 07 Digital Inductive (CT model) ECM 70 |
How much HP does a Mercury 50 have?
Specifications – 50 EFI
HP / kW | 50 / 37 |
---|---|
Full throttle RPM | 5500-6000 |
Fuel induction system | 2 valves per cylinder, single overhead cam (SOHC) |
Alternator amp / Watt | 18 amp / 226 watt |
Recommended fuel | 87 octane |
What kind of oil goes in power trim?
Dextron ATF is a good substitute for outboard tilt and trim oil, especially since the tilt-trim unit is a hydraulic system. As a substitute, Penzoil company has a marine tilt-and-trim hydraulic fluid that can be used for power steering and tilt-and-trim systems.
How big is the power steering fluid in Mercury power trim?
Mercury/Quicksilver Part Power Trim & Steering Fluid 32 Oz. . . Only 6 left in stock – order soon. . Only 5 left in stock – order soon. . In stock soon. .
What is a Mercury EFI outboard motor?
Great for aluminum tiller, aluminum console, fish & ski boats and pontoons. Mercury EFI outboards deliver reliable turnkey starts, improved fuel efficiency, and instant throttle response. High-displacement, four-cylinder, single-overhead-cam design delivers optimum power and a smooth ride.
What are the specs of a 60 EFI engine?
Specifications – 60 EFI HP / kW 60 / 45 Engine type Inline 4 Displacement (CID/CC) 60.8 / 995 Full throttle RPM 5500-6000 Fuel induction system 2 valves per cylinder, single overhead c