Other

How do you bring up console on F5?

author 0

How do you bring up console on F5?

Connect the console port cable from the system to a management workstation or console server. Power on the system. Log in using the default user name root and the default password default . Note: If you cannot see or read output on the serial console, make sure that the baud rate is set to 19200.

What does a serial console do?

Serial Console is used to initially connect to your device, and to conduct out-of-band management. Out-of-band management is management that is not network based, such as access via modem. There are certain benefits to using a serial console that you do not get from using any other type of connection.

How do I check my F5?

Note: For information about displaying the version information for other F5 products, refer to K914: Displaying the software version of your F5 product. Go to System > Configuration. The software version displays in the Version box.

How do you check AOM in F5?

Log in to the BIG-IP command line using the management interface. Enter the user name and password. Note: By default, the AOM user name and password uses the root logon credentials. Press Enter to deactivate another concurrent session.

How do I reset my f5 LTM?

  1. Log in to the tmsh utility by typing the following command: tmsh.
  2. To restore the BIG-IP configuration to the factory default settings, type the following command: load /sys default-config.
  3. To confirm the restore, type y.
  4. Save the change by typing the following command: save /sys config.

How do I reset my f5 password?

To change the administrative password from the command line, perform the following procedure:

  1. Log in to the command line.
  2. To reset the administrative password, type the following command: f5passwd admin.
  3. When prompted, type the new administrative password.
  4. When prompted, retype the new administrative password.

What are the advantages and disadvantages of using the serial console connection?

Serial mode offers the advantage of fewer traces on the pc board, and fewer pins on the devices. Parallel offers the advantage of transferring 8 data bits per I/O clock cycle, but at the disadvantage of many more pins required on the devices.

What is azure serial console?

The Serial Console in the Azure portal provides access to a text-based console for virtual machines (VMs) and virtual machine scale set instances running either Linux or Windows. Serial Console is generally available in global Azure regions and in public preview in Azure Government.

How do I find my F5 serial number?

The serial number begins with F5, followed by a dash character ( – ), followed by four alphanumeric characters, followed by a dash, followed by four alphanumeric characters….

  1. Log in to the Configuration utility.
  2. Go to System > Clusters.
  3. Under the Properties, locate the Blade Serial Number next to the appropriate Slot ID.

How do I find my F5 support ID?

Resolution

  1. Log in to the BIG-IP ASM Configuration utility.
  2. Navigate to Security > Event Logs > Application > Requests.
  3. Click the Show Filter Details link.
  4. Locate the Support ID section and select Last 4 digits.
  5. Enter the last four digits of the support ID in the support ID text box.
  6. Click Go.

What is F5 SCCP?

SCCP is a separate subsystem that provides control of the F5 switch hardware using the 10/100/1000 Ethernet management port over secure shell (SSH), or using the serial console. The following examples include ways you can use the SCCP subsystem: Change the system boot device. Halt or restart the system.

What is F5 AOM?

Always-On Management (AOM) is a separate subsystem that provides lights-out management for the BIG-IP system using the 10/100/1000 Ethernet management port over secure shell (SSH) or the serial console.

How do I connect F5 to a DB9 console?

Connect the RJ45 to DB9 console port or serial console cable supplied by F5 ® to the CONSOLE port on the system. Note: The default serial port settings are 19200, n, 8, 1.

How do I remotely manage the F5® platform?

Note: F5 ® recommends that external CD/DVD drives be externally powered. You can remotely manage the platform by connecting to a serial console terminal server through the console port. Important: In the event that network access is impaired or not yet configured, the serial console might be the only way to access the chassis.

What type of device can I use with F5®?

You can use either 10/100/1000/10000-Megabit or 40/100-Gigabit Ethernet switches. You can use a USB-certified CD/DVD mass storage device or a USB flash drive for installing upgrades and for system recovery. Note: F5 ® recommends that external CD/DVD drives be externally powered.

What should I do with the serial console?

Important: You should perform all BIG-IP software installations and upgrades using the serial console, as these procedures require reboots, in which network connectivity is lost temporarily. Additionally, you should connect to the console to run End-User Diagnostics (EUD) tests.

author

Back to Top