How do you calculate MOV?

How do you calculate MOV?

The current rating of the MOV could be twice that of the SMPS rating, meaning if the SMPS wattage is rated at 24 watts at the secondary, then the primary could be calculated as 24/285 = 0.084 amps, therefore the MOV current could be anywhere above 0.084 x 2 = 0.168 amps or 200mA.

What is SIOV?

SIOV® 1) varistors have been proven to be excellent protective devices because of their application flexibility and high reliability. The metal oxide varistor, with its extremely attractive price/ performance ratio, is an ideal component for limiting surge voltage and current as well as for ab- sorbing energy.

What is the purpose of a varistor?

Varistors are used to protect a circuit from high voltage surges. When a high voltage surge is applied to a circuit, the outcome is usually catastrophic to the circuit. A capacitor may be installed across the signal lines. However, this capacitor cannot suppress voltage surges.

How do you choose varistor voltage?

For example, selecting a MOV or silicon varistor for that matter, for voltage, its maximum continuous rms voltage rating should be just above the highest expected supply voltage, say 130 volts rms for a 120 volt supply, and 260 volts rms for a 230 volt supply.

What is SR IOV?

Single Root I/O Virtualization (SR-IOV) is the complex name for a technology beginning to find its way into embedded devices. SR-IOV is a hardware standard that allows a PCI Express device – typically a network interface card (NIC) – to present itself as several virtual NICs to a hypervisor.

What is scalable iov?

Intel® Scalable I/O Virtualization (Intel® Scalable IOV) is a set of technologies which aims to be a lightweight and scalable approach for hardware-assisted I/O virtualization. The Intel Scalable IOV-capable device can be configured to group its resources into multiple isolated Assignable Device Interfaces (ADIs).

What is the function of varistor in alternator?

As per data available on internet the Varistor protect the electronic component from Transient Voltage or surge in voltage or lightning strike. in these condition the varistor internal resistance become low & it create close path which will protect the components.

What are the different types of varistors?

Types of Varistors 1 Silicon Carbide Varistor: As can be guessed from the name itself, the body of the Varistor is made from Silicon Carbide… 2 Metal oxide Varistors (MOV): Since SiC Varistors had some serious drawbacks, another type of Varistors the metal oxide… More

What is the difference between potentiometer and varistor?

Unlike the potentiometers and rheostats, where the resistance changes from a minimum value to a maximum value, here in Varistor the resistance changes automatically with a change in applied voltage. This Varistor has two semiconductor elements, and provides over voltage protection in a circuit, similar to a Zener diode.

What is the difference between varistor and DIAC?

In its early days, the Varistor was represented as two diodes placed anti-parallel to each other, as shown in figure, due to its diode like behaviour in both directions of current flow. However, now that symbol is used for a DIAC.

Why can’t I change the resistance of a varistor?

First, the change in resistance cannot be done manually like that in a pot or a rheostat. Second, under normal operating voltage, the resistance offered by a Varistor is very high.

author

Back to Top