How do you change the draw length on a PSE Nova?
How do you change the draw length on a PSE Nova?
Slide the connectors up and away from the bow limbs and pull them out of the pulley wheels. Move the connectors to a new hole or position on the wheels (a higher hole if you want the draw length shorter or a lower hole if you want the draw length longer).
Does changing draw weight change draw length?
The weight of a bow (the ‘poundage’) is always measured at a standard 28″ draw length, but that weight changes at different draw lengths. For each inch over (or under) 28 inches, your bow weight will increase (or decrease) by 2.5 pounds.
How do you adjust the draw length on a bow?
Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches depending on the compound bow.
How do you adjust the draw length on a PSE compound bow?
To change draw length on the ECS: Loosen the two 8-32 size 15 Torx® screws holding the module to the cam approximately 1-1/2 turns, move the module to the desired setting. The setting will be in the window marked “DL” move the module to the same setting on both top and bottom cams.
How long should my draw length be?
Resist the temptation to make your draw length longer than it should be, as this will effect your accuracy. Your wingspan typically is the same as your height in inches; So your height in inches minus 15 and then divided by 2 will be your draw length, or at least a very good starting point.
How do you adjust the draw length on a PSE vengeance?
To adjust draw length, loosen the two 8-32 button head screws 2 full turns. This will allow the inner-cam to be lifted far enough to disengage the positioning pin and allow the inner-cam to rotate to a new position.
The PSE Nova can have its draw length changed quickly and easily. Draw the bow to full draw and hold it. Have your assistant place a nail in the small round hole in the bottom of each pulley wheel and then slowly let the pressure off of the bow string.
What is the draw length of the PSE Nova compound bow?
The PSE Nova compound bow is shipped with a standard 29 inch draw setting, but can be easily adjusted to fit anyone. The draw length of the PSE Nova can be tailored from 27 inches to 30 inches with an easy to use inner module.
How do I adjust the draw length of my Bow Press?
If you need a shorter draw length than 27 inches, you have the option to purchase an additional adjustment module that allows for a draw length of 25 inches to 28 inches. All adjustments are easily made, without the use of a bow press simply by using their modules.
How to adjust draw weight in PSE compound bows?
Some good practices to consider when adjusting the draw weight in PSE Compound Bows are: Always turn the the limb bolt clockwise towards the bottom position before making any adjustments. This way, you will have a good bearing on the changes you are making on your gear. Always turn the limb bolt with caution.
