Useful tips

How do you change the toner on a Brother MFC 1810?

author 0

How do you change the toner on a Brother MFC 1810?

Replace Toner

  1. Open the covers.
  2. Take out the drum unit assembly out of the machine.
  3. Replace the toner cartridge.
  4. Slide the green tab on the drum unit from side to side 3 times. Be sure to return the tab to the home position (1).
  5. Put the drum unit assembly back into the machine and close the cover.

What toner does the Brother MFC-L2710DW use?

TN730
The Brother MFC-L2710DW uses either a TN730 standard yield toner cartridge or a TN760 high yield toner cartridge. Both toner cartridges should be installed into a DR730 drum unit. You can get low-cost compatible replacements for all toners and drum unit below.

What toner does Brother MFC l8610cdw use?

Original Brother TN431M Magenta Toner Cartridge (1,800 Page Yield)

What toner does Brother MFC l2713dw use?

Brother TN2430
This printer uses Brother TN2430 series toner, with an approximate yield of 1,200 pages and Brother TN2450 toner, with an approximate yield of 3000 pages.

How do you reset the drum on a Brother MFC 1810?

Reset the drum counter

  1. Press Menu.
  2. Press the Up or Down arrow key to choose Machine Info.. Press OK.
  3. Press the Up or Down arrow key to choose Reset Drum. Press OK for 3 seconds.
  4. Press the Up arrow key to reset the drum unit counter.
  5. Press Stop/Exit.

How do you change the toner on a Brother MFC 1910W?

How do I reset my Brother MFC L2713DW toner?

How to Reset Toner on Brother MFC-L2710dw, TN-760 Toner

  1. Open front cover of printer (to reveal the cartridge mechanism) and “Front Door Open” will flash on the display.
  2. Next, press STOP/EXIT and CLEAR at the SAME TIME (one quick press)
  3. Immediately after, press CLEAR once again.
  4. A menu called RESET MENU will appear.

Does MFC L2713DW print color?

The MCF-L2713DW is a mono printer, which means it prints in one colour.

How do I clean my brother mfc 1810?

Push down the lock lever (1) and take the toner cartridge out of the drum unit (2). Turn the drum unit gear by hand while looking at the surface of the drum roller (1). Wipe the surface of the drum gently with a dry cotton swab until the dust of glue on the surface comes off.

How do I change the toner on my Brother MFC 1910W?

author

Back to Top