How do you convert BTU to cubic feet?
How do you convert BTU to cubic feet?
Divide the energy transfer rate in BTUs per hour by 100,000, which is the number of BTUs in a therm. For instance, if you are converting a rate of 500,000 BTUs per hour: 500,000 ÷ 100,000 = 5 therms/hr. Multiply this answer by 96.7, which is the volume of a therm of natural gas: 5 × 96.7 = 483.5 ft³/hr.
How much energy does a cubic foot of natural gas?
How Natural Gas is Measured
| UNIT OF MEASURE | APPROX. HEAT ENERGY |
|---|---|
| 1 cubic foot | 1,000 BTU’s |
| 100 cubic feet (1 therm) | 100,000 BTU’s |
| 1,000 cubic feet (1 mcf) | 1,000,000 BTU’s |
How do you convert cubic feet of gas per hour to BTU?
To convert from BTUs to cubic feet per hour divide BTU/1100 (example: 50,000 BTU by 1100 = 45.5 cubic feet of gas per hour). See the example on page 2 to help further illustrate this. To get BTU from cubic feet, multiply cubic x feet 1100 (45.5 cubic feet x 1100 = 50,000 BTU.)
How many BTUs are in a cubic foot of propane?
2,516 BTUs
BTUs. One cubic foot of propane = 2,516 BTUs. One cubic foot of natural gas = 1,030 BTUs.
Is cubic feet per hour the same as BTU?
The BTU’s per hour unit number 2.72 Btu/h converts to 1 atm cfh, one atmosphere cubic foot per hour. It is the EQUAL power value of 1 atmosphere cubic foot per hour but in the BTU’s per hour power unit alternative.
How many BTU are in a m3 of natural gas?
35300 BTU
For 1 m3 of natural gas, you would multiply by 1 m3 by 0.0353, which would give you 0.0353 MMBtu. To get this number in units of BTU, you would multiply it by 1000000, which would give you a total of 35300 BTU in an m3 of gas.
What is BTU in gas?
BTU stands for British Thermal Unit, and is used as a unit of heat energy. Strictly speaking, BTUs represent the amount of energy required to raise the temperature of one pound of liquid water by one degree Fahrenheit.
How many BTUs are in a gallon of propane?
91,500 BTUs
Propane has 91,500 BTUs per gallon. 1.52 gallons equals the heat of one gallon of oil. Electricity has 3,413 BTUs per kilowatt hour (kwh).
How many BTUs are in a gallon of gasoline?
116,090 Btu/
How are GGE and DGE values determined?
| Fuel | Energy Content* | Quantity of Fuel in 1 DGE |
|---|---|---|
| Gasoline | 116,090 Btu/gallon | 1.11 gallon |
| Low Sulfur Diesel | 128,488 Btu/gallon | 1.00 gallon |
| Biodiesel (B20) | 126,700 Btu/gallon | 1.01 gallon |
| Biodiesel (B100) | 119,550 Btu/gallon | 1.07 gallon |
Will a generator run longer on propane or gas?
But if running out of fuel is a concern, propane is a better choice because it will last you longer.
How do you read a gas meter in cubic feet?
To obtain a reading, read the dials left to right, recording the numbers in the same order, left to right. The correct reading for this meter is 2017. This means that 2017 hundred cubic feet (MCF) of gas has passed through the meter since all dials were on zero. Another way to write this amount is 201,700 cubic feet.
How do I calculate BTU of gas?
Measure the length,width and height of each room in the building.
How do you convert kWh to BTU?
Convert BTU to kW and kW to BTU. Stove boiler outputs are often listed in BTU ( British Thermal Units ) so it is useful to be able to switch easily between BTU and kW. To convert BTU to kW simply multiply by 0.000293. To convert kW to BTU simply multiply by 3414.
What is a standard cubic foot of gas?
“A standard cubic foot of gas is defined as a cubic foot at a temperature of 21 °C (70 °F) and a pressure of 101.35 kilopascals (14.696 psia)”. Other base pressures and temperatures are sometimes used as well.
How many cubic feet are in a gallon of gas?
Remember 1 cubic foot of water equates to 7.4805 gallons of water and weighs approximately 62.4277 pounds(1 gallon of water: 8.34504 lbs).In Natural Gas, Centum-Cubic Feet (100 Cubic Feet: CCF ) and Therm are used.
