How do you convert GPM to ft3 s?

How do you convert GPM to ft3 s?

gal (US)/min↔ft3/s 1 ft3/s = 448.83116880793 gal (US)/min.

How many cubic ft are in a GPM?

The gallons US per minute unit number 7.48 gal/min converts to 1 cu ft/min, one cubic foot per minute.

How do you convert GPM to Scfh?

Conversion chart – gallons US per minute to Standard cu-ft in gas per hour

1. gallon US per minute to Standard cu-ft in gas per hour = 8.02 SCFH at 59°F.
2. gallons US per minute to Standard cu-ft in gas per hour = 16.04 SCFH at 59°F.
3. gallons US per minute to Standard cu-ft in gas per hour = 24.06 SCFH at 59°F.

How many gallons are in a CFS?

Cubic feet per second (cfs): * 1 cubic foot per second = 7.4805 gallons flowing by a particular point in 1 second. * 1 cfs = 1.983 acre-feet per day = 646,320 gallons = 2447 cubic meters of water. * 1 cfs is equivalent to 448.8 gallons of water flowing per minute.

How do you calculate gpm from TR?

One refrigeration ton is a cooling rate of 12,000 BTUs per hour. Multiply the exchanger’s flow rate in gallons per minute by 500, a conversion constant. For example, if 350 gallons flow through the unit each minute: 350 × 500 = 175,000.

How do you convert discharge to volume?

1. To convert discharge from mm/day to a volume unit of liters/day use the following formula: mm/day*(0.001m/mm)*total watershed acres*(4047 m2/acre)*(1000 liters/m3) Example: HF1 is 30 acres in size.
2. 4.4 0.6. 2.6. 0.3.
3. Pre. (2009) (a) HF1.
4. 7.5. 11.0. 7.0.
5. Pre. (2009) Post.
6. Midstory. Canopy. Cover.

How do you calculate gpm from volume?

Convert the volume of water (bucket’s capacity) to gallons. Divide the volume by the time expressed in seconds to get gallons per second. Multiply by 60 to get gallons per minute.

How do you calculate GPM?

Place a large container such as a 5-gallon bucket beneath the faucet. Five-gallon buckets are available at all home centers and hardware stores.

Start a stopwatch and run the water at full capacity for exactly 15 seconds.

With a gallon-sized container,measure the amount. Use an online unit conversion tool if necessary to convert to gallons,and then multiply this figure by 4.

How to convert GPM to velocity?

With the new volumetric flow rate, you can divide it by the cross-sectional area of the object the water is traveling through to get the velocity that the water is moving at. The resulting equation is shown below: Velocity = ( GPM * 0.0228 )/ (Cross-sectional area)

How many GPM is high flow?

The high-flow hydraulic system provides an additional 30 gpm (114 liters per minute) of flow for a total of 78 gpm (295 L/min). This system is ideal for hydraulic fan motor demands.