How do you convert to L band?
How do you convert to L band?
To get from Ku-Band to the L-Band you would use 10750 MHz as a Local Oscillator mixer frequency, and to get from C-Band down to L-Band you would use 5150 MHz as a Local Oscillator mixer to down convert to L-Band.
What is the frequency range of L band?
1 – 2 GHz
L band
| Frequency range | 1 – 2 GHz |
|---|---|
| Wavelength range | 30 – 15 cm |
| Related bands | D (NATO) UHF (ITU) |
How do you determine frequency?
Frequency is expressed in Hz (Frequency = cycles/seconds). To calculate the time interval of a known frequency, simply divide 1 by the frequency (e.g. a frequency of 100 Hz has a time interval of 1/(100 Hz) = 0.01 seconds; 500 Hz = 1/(500Hz) = 0.002 seconds, etc.)
What is DAB L band?
DAB uses a wide-bandwidth broadcast technology and typically spectra have been allocated for it in Band III (174–240 MHz) and L band (1452–1492 MHz), although the scheme allows for operation between 30 and 300 MHz.
What is W band used for?
The W band is used for satellite communications, millimeter-wave radar research, military radar targeting and tracking applications, and some non-military applications.
How do you calculate wavelength and frequency?
Frequency (f) and wavelength (λ) are joined by the equation fλ = c, where c is the speed of light. As the speed of light is constant, if you increase the frequency, the wavelength must decrease to maintain this equation and vice versa.
What is the L band wavelength?
The L-band, ranging from 1565 nm to 1625 nm, stands for the long-wavelength band (see Figure 1). It is the second primary wavelength band used for optical communication, because attenuation of optical fiber in the L-band is the second lowest after the C-band.
What band is 76ghz?
W band
(The 71–76 GHz / 81–86 GHz segment of the W band is allocated by the International Telecommunication Union to satellite services.)
How to convert Ku-band to L-band?
To get from Ku-Band to the L-Band you would use 10750 MHz as a Local Oscillator mixer frequency, and to get from C-Band down to L-Band you would use 5150 MHz as a Local Oscillator mixer to down convert to L-Band.
How does the frequency conversion calculator work?
This frequency conversion calculator takes the input frequency band and converts it to output upper and lower sidebands. If frequency (spectral) inversion occurs, a message is place above the Lower Sideband area. If frequency folding occurs, a message is placed next to the LSB “Lower” frequency area.
What frequency range do I need for 70mhz to C band conversion?
For 70MHz to C band conversion, LO of 1112.5 MHz and Synthesizer of 4680-5375MHz frequency range is recommended. The rule of thumb for choosing mixer is the LO power should be 10 dB greater than the highest input signal level at P1dB.
What is C band down converter?
This RF down converter module translates RF frequency in the range from 3700 to 4200 MHz to IF frequency in the range from 52 to 88 MHz. Hence it is known as C-band down converter. The figure-2 depicts block diagram of C band down converter using RF components. Let us see design of RF down converter part with step by step guide.
