How do you disassemble a brother LS 2125?

How do you disassemble a brother LS 2125?

How to Disassemble a Brother LS-2125

1. Unplug the sewing machine and remove the needle.
2. Open the latch on the shuttle cover and pull out the bobbin and the bobbin case.
3. Remove the faceplate of the needle housing by unscrewing the screw on the upper back of the machine, behind the needle housing.

How do you oil a brother LS 2125i?

Oiling

1. Remove the power supply plug from the outlet.
2. Put 2 to 3 drops of oil at each of the points indicated in fig. A.
3. After oiling, run the machine at a fast speed without thread. installed for a short time.
4. Be sure to wipe any excess oil off the machine.

What kind of needle does a brother LS 2125 use?

Answer: The LS2125 uses regular home sewing machine needles up to size 16.

How do I adjust the tension on my Brother sewing machine?

Turn the thread tension dial to a lower number (toward the left). (Loosen the thread tension.) When the upper thread is visible from the lower side of the fabric. Turn the thread tension dial to a higher number (toward the right).

Do Brother sewing machines need oiling?

If you are a Light to Moderate user (2 – 3 hours per day), your product should be oiled as described in the User’s Manual. Most products require 1 – 2 Drops of Sewing Machine Oil at each oiling point, once a month, taking care to remove any thread or dirt and to wipe off any excess oil.

How often should I oil my Brother sewing machine?

Put a drop of oil onto the hook once a day before use. Apply one drop of oil on the lower needle bar above the felt washer every 40 – 50 hours of sewing time.

Is Brother LS 2125 low shank?

The buttonhole process is a 4 Step Buttonhole….Brother LS2125i. Easy-To-Use. RRP: Visit Amazon for current discounts.

author