How do you fix sticky iPhone volume buttons?
How do you fix sticky iPhone volume buttons?
Try scraping-out dust and gunk around the volume control with a q-tip. You can also vacuum the iPhone volume button stuck or use compressed air to blow the dirt out. This is one of the most common reasons that the volume button stops working, so try cleaning your phone first.
How do you fix a broken iPhone home button?
Reset All Settings Another quick solution to resolve the iPhone home button issues when it is cracked is resetting all settings on your iPhone. Here is how to do that. On your iPhone, go to ‘Settings’ > ‘General’ > ‘Reset’ > ‘Reset All Settings’. Upon prompted, type in your passcode (if any) and you are good to go.
Why is my iPhone volume stuck?
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons. Go to Settings > General > Reset and tap Reset All Settings. All your preferences and settings are reset.
How do you clean a sticky iPhone screen?
Follow these guidelines for cleaning:
- Unplug all cables and turn off your iPhone.
- Use a soft, slightly damp, lint-free cloth—for example, a lens cloth.
- If material is still present, use a soft, lint-free cloth with warm soapy water.
- Avoid getting moisture in openings.
- Don’t use cleaning products or compressed air.
How can I flash my iPhone 4 without the home button?
Connect your device to the computer. Press and hold the “volume down” button and “side” button at the same time. Keep holding the button until “Connect to iTunes” appear on the screen. Don’t release the button when you see the “Apple” logo.
How can I reset my iPhone 4s if my home button doesnt work?
Open up a stock app, like the Clock. Hold down the sleep button until “Slide to power off” appears. When it does, let go of the sleep button and hold down the home button. After about 5-10 seconds, the app will close.
How do I get my home button to work again?
To enable the on-screen home button, go to Settings > General > Accessibility > Assistive Touch. Turn Assistive Touch on, and you’ll see a small circle appear on screen.
How do you remove the battery from an old iPhone?
Remove the metal clip covering the antenna connector. Use the clear plastic pull tab to gently lift the battery out of the iPhone. If the tab breaks before the battery is freed, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery.
How do you fix the home button on an iPhone?
A splash of soda, sticky hands, dirt in the bottom of your purse or pocket — any of these things can damage your iPhone’s home button. For this fix, you’ll need 98-99 percent isopropyl alcohol, which can be found at hardware stores.
How do I disassemble my iPhone 4?
Power off your iPhone before beginning disassembly. Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple’s 5-Point “Pentalobe” screws ( second image ). Check which screws you have, and ensure you also have the correct screwdriver in order to remove them.
How do I remove the iPhone 4 rear cover?
Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple’s 5-Point “Pentalobe” screws ( second image ). Check which screws you have, and ensure you also have the correct screwdriver in order to remove them. Remove the two 3.6 mm Pentalobe or Phillips #000 screws next to the dock connector.
