How do you inspect an electric forklift?
How do you inspect an electric forklift?
If you are inspecting an electric forklift, check that all battery connections are in good condition. If the machine is propane-powered, check integrity of tank brackets and bolts once you’ve finished your engine compartment inspection. Move to the rear of the forklift and look at the exhaust guard, noting and damage.
What do you check on a electric forklift?
Here are a few items worth checking on your electric forklifts:
- There is no fraying or exposed wires in cables or connectors.
- Battery restraints are functional.
- Electrolyte levels are proper.
- The hood latch is operational.
Does OSHA require a forklift checklist?
Federal OSHA requires that forklift vehicles have to be inspected at least daily, or after each shift when used around the clock. You will find this requirement in the Powered Industrial Truck standard at 1910.178(q)(7).
What are the two parts of a forklift safety inspection?
There are two main categories that a forklift inspection will cover: the forklift’s load-handling capacity and its general safety and maintenance.
What is the OSHA standard for forklift?
OSHA 29 CFR 1910.178(I) requires that employers provide forklift operators training for vehicle inspection and maintenance. Operators must be over 18 years of age and be recertified at least once every three years. The similar CSA standard is B335-04 (R2012).
Which specific forklift items require close inspection before operation?
Fluid levels, including the oil, water, and hydraulic fluid….Liquid propane forklifts must be inspected for these items:
- Properly mounted tank.
- Pressure relief valve pointing up.
- Hose and connectors.
- Tank restraint brackets.
- Dents and cracks on the tank.
- Properly fitting tank to profile of truck.
- Leaks.
What are 3 fluid levels that need to be checked before using the forklift?
Check of liquid Levels:
- Hydraulic fluid.
- Brake fluid.
- Engine oil coolant.
- Battery.
- Fuel.
How high should forks be when driving forklift?
6 to 10 inches
Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy.
What is the priority of OSHA inspections?
OSHA’s top priority for inspection is an imminent danger-a situation where workers face an immediate risk of death or serious physical harm. Second priority goes to any fatality or catastrophe-an accident that requires hospitalization of three or more workers.
How does OSHA conduct inspections?
OSHA conducts inspections to enforce OSHA’s health and safety regulations for the purpose of keeping employees safe. Inspections can be triggered by an employee complaint, a referral from another agency, a fatality or serious accident or by a planned inspection. Most inspections are triggered by worker complaints and are unannounced.
How to comply with OSHA forklift regulations?
Review the OSHA Powered Industrial Trucks Regulations. You must be familiar with the regulations covering forklift operations.
Does a safety inspection before using your forklift?
When you go through forklift safety training, you’re taught that forklift safety inspections should be performed before every single shift . This does not mean that one safety inspection per day is all that is required. If there are multiple shifts per day, each operator must perform an inspection before their shift begins.
