How do you jump the SCS line?
How do you jump the SCS line?
To prevent this they tell you to jump the SCS line with the HDS. This is done after you turn the key to the LOCK (0) position. They instruct you to use the HDS to jump the SCS line and then remove your PCM connectors and do your testing. Once you’re done, you reconnect the PCM and then un-jump the SCS.
What is Honda SCS mode?
SCS (service check cable) is a mode that is ‘backward compatible’ with Honda’s previous OBD1 implementation… same as linking the 2-pin connector in a ’90s car then counting the warning light flashes to decode the stored error. For convenience, Honda have included the SCS pair in the current OBD2 port.
What is SCS circuit?
SCS: Motor start/stop circuit, an equivalent circuit with two transistors. The motor may be stopped by interrupting the power supply, as with an SCR, and this is called natural commutation. However, the SCS provides us with another means of turning off: forced commutation by shorting the anode terminal to the cathode.
What is Honda DLC?
The SCS / DLC Switch by SmartMoto connects to the DLC connector and allows you to enable the service diagnostics mode on any Honda Fi motorcycle. This mode will let you to access the stored ECU error codes and troubleshoot Fi problems.
What is HDS Honda?
Honda HDS (Honda & Acura Diagnostic System) is the latest diagnostic software for Honda vehicles. Diagnostic functions available for vehicles of HONDA/ACURA from year 1992 to 2007. Test coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc. HDS supports CAN BUS system, and it can re-program the Auto ECU.
What is SCS and SCR?
SCS differs from an SCR in the following aspects. It has an additional gate—the anode gate.It is physically smaller than SCR.It has smaller leakage and holding currents than SCR.It needs small triggering signals. It gives more uniform triggering characteristics from sample to sample.
How many terminals are in SCS?
two terminal
The SCS (Silicon Controlled Switch) is a. two terminal device.
What scan tool does Honda use?
FOXWELL NT510 Elite Scan Tool for Honda is the most cost-effective professional codes reader for enthusiasts, small garages, independent repairs, specialized garages and technicians by delivering OE-level diagnosis on all the electronic systems.
What is a Honda SCS connector used for?
The Honda Service Check Short Service connector is a simple jumper connector that is used to check and erase Diagnostic Trouble Codes (DTC). This SCS service connector is needed on a wide range of Honda powersport engines- ATVs, motorcycles, and personal watercraft all require this basic tool.
What is a service check short service connector?
Honda Service Check Short Service Connector. The Honda Service Check Short Service connector is a simple jumper connector that is used to check and erase Diagnostic Trouble Codes (DTC). This SCS service connector is needed on a wide range of Honda powersport engines- ATVs, motorcycles, and personal watercraft all require this basic tool.
When to disconnect SCS service connector for Mes connector?
3rd Disconnect SCS service connector for MES connector within 4 seconds after SRS indicator light goes off. SRS indicator light will come on again. 4th Reconnect SCS service connector the MES connector within 4 seconds after SRS light comes on.
Where can I buy speaker harnesses for my Honda Accord?
First you need to go to Best Buy or Circuit City and pick up some late model Honda speaker harnesses by Metra. The Metra model number is 72-7802. Cut the female disconnects off the ends of the speaker harnesses and strip about a half inch of jacket off of the wire.
