Common questions

How do you measure a head cap screw?

author 0

How do you measure a head cap screw?

Length is measured from the point at which the head sits flat with the surface, to the tip of the threads. Hex, pan, truss, button, socket cap, and round head screws are measured from right under the head to the end of the threads. Flat head screws are measured from the top of the head to the tip of the threads.

How deep is a counterbore?

Counterbore Hole Size Chart for Socket Cap Head Fasteners (GB)

Fastener Size Pilot Hole Diameter (Close Fit H12) Counterbore Depth
Fastener Size Pilot Hole Diameter (Close Fit H12) Counterbore Depth
M14 15.0 15.0
M16 17.0 17.5
M20 21.0 21.5

What is drive size of a screw?

Drive Sizes for US Allen Drive Screws

Screw Diameter Drive Size
Socket Flat Socket Cap
#0 0.89mm (0.035″) 1.27mm (0.050″)
#1 1.27mm (0.050″) 1/16″
#2 1.27mm (0.050″) 5/64″

What are Buttonhead screws?

A button head socket cap screw is a type of cap screw with a cylindrical head and hexagonal drive hole. Button Socket Head Screws are commonly used in automotive, electronics, machinery and manufacturing applications due to their versatility, raised dome head, and durability.

What is the diameter of the counterbore?

COUNTERBORE HOLE DIMENSIONS CHART (INCH)

Nom. Size or Basic Screw Dia. Normal Drill Size, A
0 0.0600 0.067
1 0.0730 0.081
2 0.0860 0.094
3 0.0990 0.106

What is button screw?

Button Head Screws feature a low-profile domed head. Due to their unique head shape, these fasteners are sometimes called Dome Screws or Round Head Screws. Accu also stock a variety of Driver Bits for use with these fasteners.

How are inch threads measured?

Steps

  1. Measure an inch-long portion of the threaded area. Grab a ruler and lay it along the bolt or screw.
  2. Count the number of threads in 1 inch.
  3. Measure the diameter and the length of the threaded area.
  4. Plug the information into a standard measurement.

author

Back to Top