How do you mix awlgrip?

How do you mix awlgrip?

Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz.

How do you mix Awlcraft 2000?

Mix by volume two parts Awlcraft 2000 Topcoat base component with one part Awlcat #5 (G3039) spray converter to a smooth, homogenous mixture.

How long does it take Awlcraft 2000 to dry?

Recommended Dry Film Thickness: 2-3 mils (50-75 microns) total of 2 or more coats. Anticipated Cure Time at 77°F, 50% R.H: 24 Hours to tape free; 3 days to light service; 14 days for full cure. Recoatability: Typical spray applications consist of two – three coats applied over 1-4 hours.

How do you mix awlgrip high build primer?

MIX RATIO: Mix 1 part High Build Primer Base D8002 / D9002 (sold separately) : 1 part High Build Primer Converter D3002 and reduce as necessary up to 25% with Reducer T0076 or T0006.

What is the mixing ratio for Awlgrip paint?

Spray Mix one part Topcoat Base Component with one part Awl Cat #2 G3010 spray converter to a smooth, homogenous mixture. Reduce up to 25% with spray reducers appropriate for conditions. Overall mix is 1:1 1/2 by volume. 25% reduction is a standard mix.

How do you mix all grip paint?

Spray: Mix by volume one part AWLGRIP Topcoat Base Component (Color) with one part AWL-CAT #2 G3010 spray converter to a a smooth homogenous mixture. Reduce up to 25% with the spray reducer(s) appropriate for conditions. Overall mixture is 1:1:1/2 volume. Example: 8oz Base, 8oz G3010, 4oz Reducer.

How much awlgrip do I need?

The mix ratio is 1:1 so if you purchase 1 quart of primer you also need 1 quart of converter for a total of 2 quarts. Additionally you need to purchase the appropriate reducer (spray or brush) for spraying reduce up to 25% with T0006 and for brushing reduce up to 10% with T0031.

Can you polish Awlcraft 2000?

Do not use polishing compounds on Awlgrip G/H Line topcoat. Awlcraft 2000 and Awlgrip HDT: Awlcare Protective Polymer Sealer will help maintain the gloss on these finishes with regular applications, especially those which have been buffed or polished. Remember, Awlcare is only applied and buffed by hand.

How do you mix awlgrip for brushing?

Roller/Brush Mix 2 parts Awlgrip Topcoat Base Component with one part Awl Cat #3/H3002 brushing converter until one smooth homogenous mixture is obtained. Reduce 25-33% with T0031. Overall mixture is 2:1:3/4-1 by volume. Application Instructions General: Sanded surface must be dry and clean.

Can you roll high build primer?

you also can roll on standard primer/surfacers with a 3⁄8-in. to 3⁄4-in. High-build primer/surfacers can contain 66% solids by weight, and they go on thick, around 20 or 25 mils wet, which is equivalent to four or five coats of regular paint.

https://www.youtube.com/watch?v=2RNpzbnTXhc