How do you open a speed dial 1500iD?

How do you open a speed dial 1500iD?

How to Open your 1500iD Speed Dial

  1. Squeeze the shackle firmly toward the lock twice and release to “clear” the lock each time before opening it.
  2. Enter the combination by sliding the button to each position in the combination pattern.
  3. Pull up on the shackle to open the lock.

How can I get the combination to my Master Lock?

Submit a Lost Combination Form

  1. Find your lock’s serial number.
  2. Print out the Lost Combination Form (PDF).
  3. Have the form notarized by a Notary Public to prove you are the owner of the lock. You can include up to 6 combinations on one notarized form.
  4. Submit your form to: Master Lock Warehouse. 24 North Free Port Drive.

How do you fix a stuck Master Lock?

Please try resetting the lock again by following the instructions below:

  1. Place lock in the open position.
  2. On the back of the lock, slide the reset lever into the “up” position.
  3. Insert the shackle into the lock and squeeze firmly twice to “clear” it.
  4. Pull up on the shackle to open the lock.
  5. Enter your new combination.

How to set Master Lock?

Open the compartment door by entering the combination. The factory-set combination is 0-0-0-0.

  • Push the reset lever left and down. The lever will remain in this position while you reset the combination.
  • Rotate the dials to your desired combination.
  • Push the reset lever back into its original position – back and to the right.
  • Close the compartment door and scramble the dials to lock. This Key Safe has a new combination. Don’t forget to store your new combination in a safe
  • What is Master Lock phone number?

    You can contact Master Lock on the given phone number +1-800-464-2088 / +1-800-227-9599 / 400-820-6535 /+86-21-688.

    How do you unlock a Master Lock?

    How to do a Master Lock Reset. Set the combination and release the U-shaped ring. Turn the hook of the U-shaped ring counterclockwise 90 degrees until the notch on the stem of the hook and the hole on the body of the lock line up. Push the stem of the hook down into the body of the lock as far as it will go.

    How to unlock a Master Lock?

    Turn the dial at least three rotations clockwise first, just to make sure it is clear.

  • Apply pressure on the shackle, which is the curved handle at the top of the padlock.
  • Find the first sticking point.
  • Release the shackle tension and turn the dial clockwise slightly past the first sticking point.
  • author

    Back to Top