How do you remove a Toyota bumper?
How do you remove a Toyota bumper?
Instructions
- Remove three 10mm bolts from top edge of bumper cover.
- Remove 10mm bolts from under fender liner on both sides.
- Remove three 10mm bolts from underside of each side of the bumper cover.
- Unsnap bumper cover from a mount that’s attached to the front fender by grabbing the front and pulling forward on both sides.
What tools do I need to take a bumper off?
An air impact wrench speeds things up, but you can do the job by hand with sockets, a ratchet and a breaker bar. You’ll also need spray rust penetrant, screwdrivers and eye protection. We’ll walk you through the steps to replace a chrome step bumper on a 2002 Dodge Ram.
How do you take off a bumper?
Pull the plastic shield down out of the way if it doesn’t come off completely. Reach behind the bumper at each corner and you should find a bolt holding the corner of the bumper to the car. Remove these bolts. The bumper should come off.
What kind of Bumper does a 2014 Toyota 4Runner have?
The 2014+ 4Runner Hybrid bumper is a unique combination of a plate steel center with round tube on the sides and can be customized in three different versions. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.
How much does a winch mount weigh on a 4Runner?
It features 3/4″ welds through shackle mounts along with a 10,000lb winch mount capacity. The bumper itself only weighs 55/60Lbs. SSO created this original add-on (pictured above) which allows you to keep the factory look of your 4Runner while gaining about 12″ of additional clearance over the OEM plastics at the tires.
What is SSO 4Runner Stage 2 Bumper?
SSO created this original add-on (pictured above) which allows you to keep the factory look of your 4Runner while gaining about 12″ of additional clearance over the OEM plastics at the tires. With the stage 2, you make cuts in your bumper at an angle, and then cup those cut lines with steel.
Does C4 Fab offer a full length front bumper?
Currently C4 Fab only offers an option for 2014+ models included ( SR5, Trail, TRD Off Road, TRD Pro) so unfortunately if you own a limited this might not be the choice for you. The bumper itself is not the traditional full-length but instead a steel replacement for the center plastic valance underneath the grille.
