Useful tips

How do you reset the maintenance light on a HP P4015?

author 0

How do you reset the maintenance light on a HP P4015?

HP LaserJet P4014 , P4015 Reset the maintenance count…

  1. Turn the product off.
  2. Turn the product on.
  3. Press and hold down the OK button while the memory is counting.
  4. Continue to hold down the OK button until all three LEDs are illuminated.
  5. Release the OK button.

How do you reset the printer maintenance?

  1. Turn the printer off.
  2. Hold down the Item key (minus side of the button) and Value key (minus side).
  3. Turn the printer on.
  4. Wait for RESET MAINTENANCE COUNT to be displayed and then release both keys.

How do you reset the maintenance light on a HP Officejet 4100?

HP LaserJet 4100 reset maintenance count instructions

  1. Turn the printer off.
  2. Simultaneously hold down the minus side of the Item key, and the minus side of the Value key.
  3. Turn the printer on while holding these buttons.
  4. Wait for RESET MAINTENANCE COUNT to be displayed and then release both keys.

How do you reset the maintenance light on a HP Officejet 4200?

maintenance-kit counter must be reset.

  1. Turn the printer off.
  2. Hold down (SELECT button), and then turn on. the printer power. Continue holding down until all. three printer control-panel lights flash once and.
  3. Press (UP ARROW button) to scroll to NEW. MAINTENANCE KIT.
  4. Press to reset the maintenance-kit counter.”

How do I reset my HP Officejet 4100 to factory settings?

Instructions

  1. Turn the printer off.
  2. Hold down the value – and item – keys (the left side)
  3. Switch the printer on.
  4. Release the keys when the display changes to reset maintenance count.

How to reset LaserJet p4515 to factory default settings?

Factory Reset for Laserjet P4515 1. Turn the product on and watch the control panel display. 2. When the display shows the memory count, press and hold the down arrow until all three lights on the control panel… 3. Press the up arrow . 4. Press Menu . The message SKIP DISK LOAD displays on the

How do I Reset my HP LaserJet p4015dn printer’s memory count?

HP LaserJet P4015DN Printer Reset Maintenance Count Procedure. 2. Power on the printer. 3. Press and hold down the “OK” button while the memory is counting. The memory begins counting at 000MB immediately after you power on the device. 4. Continue to hold down the “OK” button until all three LEDs are illuminated. 5. Release the OK button.

How do I Reset my printer’s maintenance count?

After installing a maintenance kit, you should reset the printer’s “Maintenance Count.” There are two ways to do this, depending on your firmware version. 1. Turn the printer to the “off” position. 2. Power on the printer. 3. Press and hold down the “OK” button while the memory is counting.

What is the access code on a LaserJet p4015 or p4515?

On a LaserJet P4015, the access code is 05401508 On a LaserJet P4515, the access code is 05451508 3. Enter the code and press OK.

author

Back to Top