How do you sand down a nightstand?
How do you sand down a nightstand?
Once your nightstand is stripped to raw wood, go over it with 220-grit sandpaper for a uniformly smooth surface, then wipe down with a tack cloth to remove the dust.
Can you paint over wooden drawers?
If your wood isn’t dark or knotty, a regular primer is perfectly fine. When the primer has dried, begin painting. Note: It’s perfectly fine, in fact preferable, to use a water-based paint over an oil-based primer. The oil-based primer is what will prevent stains from the wood or previous varnishes from seeping through.
How do you strip and refinish a wood dresser?
How to do it
- apply wood stripper. Apply Wood Stripper. Remove hardware from the dresser and place in a safe spot.
- scrape off paint. Scrape Off Paint.
- remove residue on dresser. Remove Residue.
- sand dresser. Sand Dresser.
- stain dresser. Stain Dresser.
- apply polyurethane to wood. Apply Polyurethane to Refinished Dresser.
How do you refinish a dresser without sanding?
Here are 5 Ways To Paint Furniture Without Sanding:
- USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required.
- USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded.
- USE A BONDING PRIMER.
- USE A LIQUID SANDER/DEGLOSSER.
Do you finish the inside of drawers?
There are two good reasons for this: One, finishing the inside of the case helps retard movement due to moisture exchange and two, finishing the insides of the drawers makes for a much nicer utility. The drawers are cleaner and more pleasant to use.
How do you restore wooden drawers?
Apply a coat of paint or varnish to all exterior surfaces of the dresser and drawers. If the drawer knobs or pulls are made of wood, paint or varnish them as well. Use a brush for applying paint or a sponge brush if applying varnish. Allow the paint or varnish to dry according to manufacturer’s instructions.
Do you have to strip wood before staining?
There’s no stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of PolyShades® (see step-by-step instructions provided in this Guide).
How do you refinish a wood nightstand?
Once your nightstand is stripped to raw wood, go over it with 220-grit sandpaper for a uniformly smooth surface, then wipe down with a tack cloth to remove the dust. Refinishing Tips Depending on the look you want, you’re now ready to either stain or paint your nightstand.
Should I stain or paint my nightstand?
Refinishing Tips Depending on the look you want, you’re now ready to either stain or paint your nightstand. While painting is probably the easier option, stain can give it a more refined appearance. We’ve included tips for both processes so you can achieve the perfect finish, whichever way you decide to go.
How do you attach drawers to a nightstand frame?
Place the nightstand frame over the leg frame and ensure alignment. Attach nightstand frame to the legs using 1-¼″ wood screws from the inside. Place the drawers into the nightstand. And DONE! I finished the drawers by staining them in the medium stain color from my panels.
Can You sand down a nightstand?
When sanding the top, sides or other large, flat areas, use a power sander. It’s important to remove all traces of the previous finish, especially if you plan to stain your nightstand. Although hand sanding isn’t the most expedient choice for large areas, keep some sandpaper on hand for those smaller places your sander can’t reach.
