How do you take apart a Price Pfister faucet?
How do you take apart a Price Pfister faucet?
Simply unscrew the handles – grip the handle tightly and turn in a counter-clockwise direction to unscrew it from the base. If the handle is screwed on too tightly, wrap it in a towel and gently use a wrench to provide some leverage. Once you have it turning freely, it should be easy to remove.
How do you fix a Price Pfister shower diverter?
Install the diverter valve’s handle. First slide the handle onto the diverter valve, then insert and tighten the handle’s single screw through the center of the handle. Turn the water supply valve in a counterclockwise direction to restore the structure’s water supply and to complete the repair.
How do I remove a Pfister faucet?
Disconnecting Under the Cabinet – Type 1 For type 1 / green tabs: push up on the assembly towards the faucet as if you are installing it. Simultaneously pull the green tabs down towards the floor – this relieves pressure on the collet holding the connector in place and allows you to remove it.
How do you repair a leaking Price Pfister faucet?
The repair of a leaking Price Pfister faucet begins by shutting off the main water line. Insert a drain stopper to prevent smaller parts from falling off. Remove the faucet handle, and loosen the collar near the faucet base. Remove the entire faucet and check the O-rings inside the stem assembly and those around the collar base.
How to fix a dripping shower faucet?
1) Look to see whether the spout is dripping—this is the most common cause of a leak. 2) Shut off the hot and cold water supply valves, which are usually silver knobs under the sink. Turn on the faucet to drain any water in the lines. 3) After removing the screw cover on the faucet handle, use a screwdriver to lift off the actual handle. 4) Once you lift off the handle, you’ll see a cap and adjusting ring. If water is leaking, tighten the ring with needle-nose pliers. 5) Remove the adjusting ring and unscrew the dome-shaped cap. 6) Remove the round metal stem and pull out the ball and cam and packing. 7) Look down into the bottom of the valve and you’ll see the seats and springs. 8) To insert a new set of seats and springs, thread one set onto the Allen wrench through the flat side of the seat, then through the skinny end
What is Moen faucet warranty?
For Faucet products, Moen warrants to the original consumers that, should there be any leak or drip during the 5-year warranty period (effective from date as shown on the purchaser’s original receipt), then Moen shall free of charge provide the necessary parts to put the product back in good working condition.
How do you repair a kitchen faucet?
How to Repair a Leaking Kitchen Faucet Base. Turn off the water supply to both the hot and cold sides of the faucet. Close any drains to prevent the loss of dropped faucet parts. Pry the plastic cover off the top of the spout using a flat screwdriver. If the faucet is a single lever type, you will need to remove the faucet handle before the spout.
