How do you use an Atmos DAB pen?

How do you use an Atmos DAB pen?

How to use an Atmos vape pen? Once the vape pen gets charged, you will easily use it. You will press the button five times to have it working. You will then heat it to let the vapor start oozing out.

How do you clean an Atmos jump?

FAQ. How do you clean an Atmos vape pen? Clean gently dirty vaporizer parts with a 90 percent alcohol solution and a cotton swab. The mouthpiece and chamber connector should be soaked for several hours in soapy water.

How do you clean a Atmos jump mouthpiece?

To clean the mouthpiece, soak a Q-tip in isopropyl alcohol (ISO) and wipe until clean. You can also do this to clean the chamber, but never soak the battery in anything.

How do you use Nano prime Atmos?

To use this feature simply inhale while the cartridge is attached to your Nano Prime battery. Pre-Heat / Automatic Function: To active the Nano Prime’s Pre-heat function, press the power button (2) times in rapid succession. Once activated, the power button will begin to shine, showing that it is heating.

Why is my Atmos pen blinking?

This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.

How do I know when my Atmos is fully charged?

When attached to the charger, the charging indicator light will shine red to indicate the devices accepting a charge. This light will stop shining when the device is fully charged. Regularly the Atmos Jump will take up to four hours to fully charge, but only charged the Atmos Jump until the red light turns off.

How do you clean a vape chamber?

To get rid of the gunk in the atomizer, coils, and chamber, dip a Q-tip in some isopropyl alcohol and gently scrub each piece. If the burned residue is really caked in there and you have a removable atomizer, you might need to soak the whole atomizer piece in a bowl of isopropyl alcohol for about a half-hour.

How do you clean isopropyl alcohol from vape?

Get rid of any visible debris whether it’s used-up bud or excess oil. Most of your vape’s small parts will be OK to soak in water, water with a few drops of dish soap or diluted rubbing alcohol (Read. Your. Manual), and use a cotton swab to loosen, scrub and wipe away visible gunk.

How long does the Atmos battery last?

Battery Life The Atmos Jump features a 1200mah internal battery to power the device. From our tests, we found the unit lasted roughly 30 to 40 minutes of continuous use. Seeing as each cycle of the Atmos is 5 minutes, the device should be able to get you at least 6 sessions before it needs to be charged.

Are Atmos batteries good?

Since Atmos’ inception, we have pushed for the use of safe and long-lasting vape batteries in our devices, and we believe it’s well worth the cost. And all of our vape pen batteries are subject to our rigorous safety standards to ensure reliable performance and long-lasting battery life.