How do you use GE Spacemaker laundry?
How do you use GE Spacemaker laundry?
GE Spacemaker Washer Instructions
- Sort laundry into like articles and place them loosely in the washtub.
- Slide the dispenser door latch to the right to unlock it.
- Turn the temperature knob to the right to select the wash and rinse cycle water temperature.
- Push in the wash cycle knob on the right of the control panel.
How do I reset my GE Spacemaker washer?
To reset washing machines that use the GE Hydrowave system, start by unplugging the washer for one minute. Plug the washing machine back in and then within 30 seconds, quickly open and close the lid six times. You’ll need to do this within a 12-second period.
How do I clean my GE Spacemaker dryer?
Spacemaker Washer – Cleaning Lint / Pump Filter
- Remove the blue lint filters from the side of the wash basket by unclipping them. You push the top of the filter down and then pull it out from the clips.
- Open the lint filter and gently remove any lint.
- Replace the filter by snapping it back into place in the wash basket.
What setting is 100 degrees on a washing machine?
Example: you select Cold water temperature setting….Washers Sensor Wash.
| TemperatureSetting | Lower | Upper |
|---|---|---|
| Cold | 60 degrees F. | 80 degrees F. |
| Warm | 80 degrees F. | 100 degrees F. |
| Hot | 110 degrees F. | 140 degrees F. |
Why my GE dryer won’t heat up?
The high limit thermostat can cause GE dryers not to heat. This is most likely caused by the dryer vent being stopped up, so if the high limit is bad, check the vent. To check the high limit, first unplug dryer. Then take the top off by removing the two screws in the door (the only two pointing up) and lift up the top.
How do I find out how old my washer and dryer is?
To determine the age of your appliance, use your serial number (not the model number) to identify the date it was manufactured. Our serial numbers begin with two letters, followed by six numbers, with a letter at the end. The two letters at the beginning of the serial number tell you the month and year it was made.
Why does my GE washing machine stop mid cycle?
Common solutions for: GE Washer stops mid cycle If the washer door is not latched shut, the door switch prevents the washer from operating. If the door lock is defective, the washer may stop mid cycle. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.
How many pages are in the GE Spacemaker wsm2700r laundry use and Care Guide?
Ge spacemaker laundry use and care guide wsm2700r, wsm2780r (28 pages) Laundry Appliance GE WSM2700WWW – 27″ Unitized Spacemaker Washer Installation Instructions Manual
How many pages are in the LG laundry appliance Technical Service Manual?
Laundry Appliance GE GTUP270EMWW Technical Service Manual 24- and 27-in. unitized laundry centers (69 pages) Laundry Appliance GE 49-90280 Use And Care Manual
How do I get a manual for my GE Appliance?
You can save paper and ink by printing only the pages for the language you need. Enter your appliance’s model number to download owner’s manuals, use and care manuals, installation information and energy guides. You can also access your GE Appliances Account to find manuals for all of your registered appliances.
