Trending

How do you use scale rule?

author 0

How do you use scale rule?

One scale reads left to right and the other right to left. Line up the zero mark on the scale selected with the beginning of the item you wish to measure, then determine at what point on the scale the end of the item you wish to measure is.

How do you read scales on architectural drawings?

For example, a floor plan of a building drawn using a metric scale of 1:100 (pronounced “one to a one hundred”), means that for each unit that is measured on the drawing (the 1), the real world size of it is 100 times larger (the 100) than it appears.

What does it mean if a scale is 1 8?

Scale is a measurement we use to give customers an idea of how big your model will be when comparing to the real-life object. If you see the scale 1:8, this means your completed model will be eight times smaller than the real thing.

How do you use a 1/8 scale?

1: The drawings state that the scale is 1/8 inch equals 1 foot. Using your architect scale, select the face of the tool with the 1/8 mark in the upper left-hand corner. Lay the “0” point at the extreme left end of this line, and read the corresponding value at the right end of the line.

How does a scale ruler work?

A scale ruler is the three-sided ruler used by architects and readers of blueprints to convert between scaled drawings and the actual dimensions without having to resort to any mathematical calculations. An architect uses the scale ruler to convert dimensions into a smaller drawing of a building plan.

How do you use the architectural scale ruler?

How to use an architect scale ruler

  1. Determine the scale used for the architectural drawing you’re reading or creating.
  2. Find the corresponding scale on your ruler.
  3. If you then want to measure out a 4-foot wall at a particular scale, simply begin your line at zero and draw it to the “4” mark on that scale.

What scale is an 8 inch figure?

Scale

Ratio Inches per foot Size
1:15 0.8″ [20.32 mm] 5″ [127 mm]
1:12 1″ [25.40 mm] 6″ [152.4 mm]
1:10 1.2″ [30.48 mm] 7″ [177.8 mm]
1:9 1.33″ [33.87 mm] 8″ [203.2 mm]

What are the measurements of a ruler?

A ruler is one of the most common measuring instruments. The ruler, shows both imperial and metric measurements. One side is 12 “inches” long (imperial), while the other is 30 centimeters (metric). The yardstick (3 feet long) or meter stick (100 cm or 1000 mm long) are two longer rulers.

How to use scale ruler?

Determine the scale used for the architectural drawing you’re reading or creating.

  • Find the corresponding scale on your ruler. On a triangular scale,you’ll most likely find two rows of numbers on each edge,one above the other.
  • If you then want to measure out a 4-foot wall at a particular scale,simply begin your line at zero and draw it to the “4” mark on that scale.
  • You’ll notice some smaller gradations to the right of zero on each scale. These fractions of an inch allow you to measure fractions of a foot.

    • How many inches is a ruler?

    One ruler is 12 inches long or 1 foot. Many rulers list the inches on one side but also list centimeters and millimeters on the other side. If your original measurement is 12 inches or below, you can use one of these rulers to measure the same distance in millimeters.

    What does a ruler measure?

    A ruler is an instrument used to measure distances, degrees and determine straight lines. There are many different types of measuring rulers, available in different shapes, sizes and materials. These rulers are used in various occupations and fields of study, such as geometry, printing, technical drawing, building and engineering.

    https://www.youtube.com/watch?v=nnwcs_86HQY

    author

    Back to Top