How does a log splitter valve work?
How does a log splitter valve work?
Most log splitters use a hydraulic cylinder (like these) to push a cut piece of log into a sharpened wedge, which splits it. The cylinder is driven by hydraulic oil, under pressure, produced by a hydraulic pump. The oil from the pump runs to a hydraulic valve, which provides control over the movement of the cylinder.
Why won’t my log splitter split wood?
If a log is not splitting all the way through then the log may be too green or too large, meaning that it would require a greater force than your log splitting machine can manage. Also make sure the log is loaded properly and isn’t on an angle or is too long.
What are the parts of a log splitter?
Key Hydraulic Log Splitter Components Include:
- Hydraulic fluid tank and hoses.
- Hydraulic pump.
- Hydraulic cylinder or ram.
- Hydraulic control valve.
- Wood splitter head or blade.
- Motor or power source.
- Splitting Wedge.
Why does my log splitter bogs down under pressure?
Hydraulic systems use pressurized fluid to power a force. If your splitter is bogging down under pressure or seems weak, chances are there is something not right with how this system is operating in reference to the size of the hydraulic pump and what it is capable of.
How can I make my wood splitter faster?
Only way to speed up a splitter is to move more oil. Either get a bigger pump or speed up the existing pump.
Why is my wood splitter so slow?
A slow log splitter is often caused by issues with the power supply, hydraulics, ram, fan, pump or cylinder. Checking each element one-by-one can help you identify the cause of the problem. The speed of a log-splitter cycle ranges from 3-5 seconds up to 30 seconds, depending on age and type of log splitter.
What are the most common causes of hydraulic system failure?
Air and water contamination are the leading causes of hydraulic failure, accounting for 80 to 90% of hydraulic failures. Faulty pumps, system breaches or temperature issues often cause both types of contamination.
What is 2 stage hydraulic pump?
Hydraulic pumps convert mechanical energy into fluid power energy. All hydraulic pumps are positive displacement which means the outlet flow is sealed from the inlet flow. A small amount of fluid is designed to leak internally to lubricate and cool the internal components of the pump.
How do I get more pressure out of my log splitter?
How to Adjust the Pump Pressure on a Log Splitter
- Start the engine on your log splitter as you normally would.
- Set the pump lever in the neutral position.
- Twist the screw on the side of the pump clockwise with a flat blade screwdriver to increase pressure, according to the scale printed or embossed on the side.
What size hydraulic pump do I need for a log splitter?
If you are serious about making your own backyard log splitter, then you want to have, at a minimum, the following components to provide the right amount of force and power for basic splitting of averaged sized, seasoned logs: A 5 Horsepower engine. A two-stage hydraulic pump rated at a max of 3 gpm at 2,500 psi.
