How does an automatic hose reel work?
How does an automatic hose reel work?
This air hose reel automatically rewinds air hose using an internal recoil spring. When hose is pulled from reel, it is pulled against the tension of the recoil spring. The more hose is pulled out, the greater the tension built up in the recoil spring. NEVER LET GO OF HOSE WHILE PULLING FROM REEL.
How do you retract a retractable hose reel?
Step-by-Step
- Before retracting the hose turn off the tap.
- Tug the hose to retract.
- Slowly walk the hose back.
- Pull the lever on the hose gun to release water pressure.
How do you straighten a new air hose?
Attach one of the hoses to the pump and stretch it out and allow the pump to push air through it for about a half hour. This should help the hose relax then do the same thing with the other hose.
What is a retractable hose reel?
The Hose Reel will stop and lock in place allowing you to water at a specific length. Once done, simply give the hose a gentle tug and the hose reel will retract all the way back in. No need to worry about the hose tangling inside the reel. So, when you are ready for the hose to retract in.
Why should you not run with the hose reel?
Remember water conducts electricity, so using a fire hose reel on it could lead to electrocution! Fire Hose Reels are easy to use, provide a virtually unlimited supply of water, as they are connected to the mains water supply, and should extend for approximately 35 metres.
How do I adjust the roller Bracket (J) on my hose reel?
NOTEThe roller bracket (J) can be adjusted to the best angle/position for the smoothest operation of hose reel (A) when the hose reel is mounted. Remove three set screws (K) and fix plate (M), rotate the roller bracket (J) to the desired position, then re-install the fix plate (M) and three set screws (K) tightly.
How do I contact 1 Kobalt customer service?
Before returning to your retailer, call our customer service department at 1-888-3KOBALT, 8:00 a.m.-8:00 p.m., EST, Monday-Friday. 1 KOBALT® and the K & Design® are registered trademarks of LF, LLC. All rights reserved. RETRACTABLE HOSE REEL PACKAGE CONTENTS
How to fix a broken hose on a reel?
M4 cap screw, some washers and 2 nuts – one to lock against the other. Then re-assembly: Feed hose through the nylon guides, and put the retaining stop back on. Clamped the whole thing to something solid, and gave a few test pulls on the hose. Tension seemed OK. Returned fixed reel to its owner.
How do I keep the air hose from automatically retracting?
The air hose must be making an audible “click” when released to maintain its length. It may be necessary to pull air hose beyond desired length to keep it from automatically retracting. 2. To retract, slowly pull air hose (B) until clicking stops. Then, let air hose automatically draw back until the bumper (I) stops against the hose guide (H).
