How does Ridgid locator work?
How does Ridgid locator work?
The RIDGID NaviTrack Scout is designed to solve the most demanding remote transmitter (sonde) locates. The Scout’s multi-directional antenna technology sees the entire signal all of the time. Simply maximize the signal strength and you have found the target. No nulls or false peaks to complicate the locate.
How do you use a sonde locator?
Locating and tracing a sonde Insert the sonde in the drain or duct access and locate it while it is still just in view at the drain or duct entrance. Hold the locator vertical directly over the sonde with the antenna in line with the sonde. Adjust the locator sensitivity so the bar graph reads between 60% and 80%.
What is a sonde used for?
Used to locate buried plastic Water Pipes, Gas Pipes and any other non-magnetic utility, Sondes are self-contained transmitters that are used with our cable and pipe locators. Sondes are typically attached to a Flexrod, pushed along the pipe, and the position of the Sonde detected from above ground.
What is a sonde survey?
The Sonde is a self-contained transmitter which is connected to a push rod and inserted into a non-metallic pipe or duct structure. The Sonde can then be detected using the CAT4. The Sonde is a self-contained transmitter which is connected to a push rod and inserted into a non-metallic pipe or duct structure. …
What is the SeekTech SR-20?
The SeekTech SR-20 is ideal for doing almost any underground pipe location, sewer location, line detection, users locating with SeeSnake inspection cameras, and need to locate energized lines. Operates with 4 C-Cell batteries that typically last approximately 16 hours.
What is the frequency range of the SeekTech SeekTech Ridgid SeekTech®?
16 Hz, 512 Hz, 640 Hz, 850 Hz, 8 kHz, 16 kHz, 33 kHz. 4 C-Cell batteries (included) or Rechargeable RIDGID® Professional 18V battery with RIDGID SeekTech® 18V Adaptor (optional).
Can a SeekTech locator find flushable Sondes?
These locators can also find flushable float sondes and remote transmitters attached to a push rod or drain cable. The RIDGID 21893 SeekTech Locator is only 3.5 pounds. SeekTech locators provide unprecedented ease-of-use for locating underground pipes.
How does the RIDGID 21893 SeekTech SR-20 work?
The proximity signal and the signal strength help work through the difficult locates and the advanced passive modes verify the locate and find unknown lines. The Ridgid 21893 SeekTech SR-20 Line Locator uses 4 C-Size batteries and weighs less than 4 pounds.
