How long does Bond Kote last?

How long does Bond Kote last?

warrants this product will perform in accordance with its intended use for a period of one year from the date of manufacture.

How to mix Bond Kote?

One-Step BOND-KOTEĀ® should be added to approximately six (6) to 6.5 quartz (5.7 to 6.1 L) of clean potable water per 65 lbs. Slowly add the powder to water and continue mixing for two (2) to four (4) minutes until One-Step BOND-KOTEĀ® is mixed to a smooth batter-like consistency.

What is bond coat for plaster?

Bond coat is used to mechanically bond new pool coatings over existing plaster finishes. It is the most effective way to ensure a uniform application of the plaster. on is present, it’s an indication that the old bond coat will no longer support a new finish.

What is pool plaster?

Pool plaster is applied as the final coating for most pools. It is commonly white in color and its functions include adding a watertight seal and creating a smooth surface on the pool floor. Aesthetically, pool plaster gives the swimming pool its finished look; making it an essential step for any pool build.

Should Gunite be waterproofed before plaster?

The concrete above the ground is a different story from the in-ground pool shell. These concrete walls are basically water retaining walls. Based on who we spoke with, in our opinion, raised walls should always have a pool waterproofing layer applied to them before plaster or tile are installed.

Can you plaster a pool in the rain?

While the rain can harm the chlorination process, it can also create issues with the plastering process too. Rain will cause streaks, discoloration, and curing mistakes once the plastering has begun.

What is Bond coats?

Highway bond coats, also known as tack coats, are used to stick an asphalt overlay to an asphalt substrate. Bond coats are most used in resurfacing when the asphalt film on the surface has been worn down by traffic. When this happens, aggregate is exposed, and the surface is weaker and more prone to damage.

How much does pool plaster cost?

The typical cost to have a pool replastered is between $4 and $7 per square foot. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that’s total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.

How do you stop gunite from weeping?

To prevent weepers and the other issues, shotcrete/gunite needs to be applied properly, which means no rebound material being blended back into the walls or steps, and follow industry standards for compaction, PSI and water-to-cement ratio.

Is Marcite waterproof?

Gunite (concrete shell) in-ground pools require a waterproof coating. The Marcite Plaster coating is comprised of varying parts white Portland Cement and marble dust. A marcite plaster pool interior is a time-tested, durable pool finish, superior to any paint or fiber-tech finish.


Back to Top