How many amps is a CS130 alternator?
How many amps is a CS130 alternator?
160 Amp
A-Team Performance GM CS130 Style 160 Amp Alternator with Serpentine Pulley. A -Team Performance alternators are a great addition to your engine, whether it’s for the great look or the reliable high-amperage output. This alternator produces 160 amps, which is a significant jump above stock.
What is a 12SI alternator?
Visual Identification and Differences. By Mark Hamilton. The “SI” in the model number stands for Systems Integrated, meaning that the voltage regulator is inside of the alternator. these alternators have a built-in voltage regulator. 10SI and 12SI are Delco Remy model number designations, but not part numbers.
What is a Delcotron alternator?
When Chevrolet introduced the redesigned Corvette in 1963 one of the new features was the Delcotron alternator that replaced the venerable generator. The voltage regulator controls the strength of the magnetic field, thereby controlling the output of the alternator.
What is the difference between 10SI and 12SI alternator?
Out back, a 12SI has much larger cooling vents than a 10SI, and a 10SI has more cooling vents than an older DN-series alternator. Besides having a higher amp output, SI-series alternators also begin charging at much lower engine rpm (which is beneficial when cruising, for example) than older-style alternators.
When did GM switch from generators to alternators?
Charging 101 Before 1963, General Motors used generators instead of alternators. They were often called dynamos or D.C. (direct current) generators. Since the only way to recharge an automotive-style wet cell battery is by using direct current, alternating current must be converted to direct current.
What year did Chevy start using alternator?
I think the 1962 cars with factory AC had Alternators and they were standard in all cars in 1963.
How many amps does a CS130 alternator have?
It came standard as 100 & 105 amp models. Although it only adds a “D” to the CS-130 designation, the CS-130D alternator is completely different from the earlier CS-130 series (shown below). None of the parts are interchangeable. 1994 to 1996 GM used both the CS-130 and CS-130 D.
What year did GM start using ad230 alternators?
Finally, in 1999 GM first introduced the new AD230 alternator. For 2002 it is the most commonly used standard alternator on GM vehicles. The AD230 alternator is very similar to the CS130D, fact is many parts are interchangeable.
What kind of alternator does Delco make?
Delco type CS130 series, 140 amp, self exciting (one-wire) internal voltage regulator alternator with finned “Iceberg” rear housing for better cooling and longer life. Self exciting alternators only require the main battery wire to the back of the alternator to work. They do not require an ignition activation wire like standard alternators.
What kind of alternator does GM use in cars?
As far as alternators go, General Motors has used only a few basic designs as the standard alternator in their cars & light trucks since the alternator was first introduced in the ’60s. The first alternator offered by GM was the externally regulated 10-DN. This alternator was very dependable.
