How many splines does a TH400 have?
How many splines does a TH400 have?
GM TH400’s primarily used 3 different output shaft lengths, all are 32 spline.
What is a 1350 slip yoke?
32-SPLINE SLIP YOKE 1350 U-JOINT A slip yoke is what allows the driveshaft to “slip” a small amount into the transmission. Its is also essential for allowing u joints to rotate properly with the drive shaft.
What is the yoke on a drive shaft?
A yoke is a device that unites, couples, or connects. As it relates to driveshafts, a yoke is the basic torque input and output component.
How much play should a slip yoke have?
For safe and stable operation, the slip yoke and spline should maintain at least 2 inches of engagement at all times.
What output spline is a TH400?
32
Gear Ratios
| Transmission | Output Spline Count and Style |
|---|---|
| Powerglide | 27 Male |
| TH350 | 27 Male |
| TH400 | 32 Male |
| 200-R4 | 27 Male |
How far should yoke stick out of transmission?
DD: The slip yoke should be able to go into the tailshaft of the transmission so the barrel is fully inside the seal. Then, pull out the yoke 1 inch. This is the correct amount of spline contact for the slip yoke.
How much does a 6L80 weigh?
195 lbs
The 6L80 transmission has a dry weight of 195 lbs, and can weigh as much as 230 lbs when filled with the recommended amount of Dexron VI transmission fluid.
Can you put a slip yoke on a normal drive shaft?
With this counterbored slip yoke you can now use a normal car style driveshaft. This slip yoke will slide all the way into the transmission. We strongly suggest that you remove the O-Ring on the output shaft because with this slip yoke it is no longer necessary.
What size is the slip yoke on a GM Turbo 400?
Yoke, Turbo 400 Transmission Slip Yoke, Steel, 1310, 32-spline, GM TH400, Each Yoke, 4L80E, TH400, M-21, M-22, T-10, T-5, Chromeoly, 32-Spline, Spicer 1350 Joint Style, CL to End Length 5.5 in. Length, OAL 6.370 in., Each Slip Yoke, 32-spline, Steel, Spicer 1310, 5.500 in. Length, Each
What kind of yoke for a T-400 transmission slip?
GM 3R Series 32 spline T-400, 4L80, 4L85 and 6L80 Transmission Slip yoke specifically designed to be used on a T-400, 4L80, 4L85, 6L80 with the Threaded Hole in the center of the Output shaft. DOES NOT FIT….
What is the length of a 1350 transmission yoke?
Yokes, Slip Yokes, Spicer 1350, 32-spline Inner, Steel, 5.500 in. Overall Length, At Transmission Position, Each Yoke, TH400 Transmission, Chromoly, 32-Spline, Spicer 1350 Joint Style, 8.810 in. Overall Length, Each Transmission Yoke, Cast Steel, 1350, 32-spline, GM TH400, Doug Nash, Borg Warner Super T-10, Each Need It Sooner?
