How much does it cost to build a deck on the back of your house?

How much does it cost to build a deck on the back of your house?

The average cost to add a professionally-built wood deck to your home is $14,360, according to Remodeling magazine’s 2020 Cost vs. Value report. That same survey found the average cost of a professionally-built composite deck — a material made of recycled wood fibers and plastic — to be $19,856.

Is it better to attach a deck to a house?

A freestanding deck is better than an attached deck in that water remains away from the house. With no ledger attached to the house, water will not become trapped against the house, possibly rotting the side of the house and deck. A freestanding deck gapped away from the house; water will freely flow off the deck.

What is a floating deck?

A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. As an independent structure, a floating deck has a few advantages over an attached deck. Primarily, frost-proof footings aren’t required.

How do you build a freestanding deck?

How to Build a Freestanding or Detached Deck

  1. Step 1: Layout & Prepare the Deck Site.
  2. Step 2: Dig Concrete Footing Holes.
  3. Step 3: Pour the Concrete Footings.
  4. Step 4: Install the Posts.
  5. Step 5: Build the Beam.
  6. Step 6: Set the Beam.
  7. Step 7: Install the Floor Joists.
  8. Step 8: Lay the Deck Boards.

How do you build a ground level deck?

How to build a ground level deck – the steps. – Attach beams to post anchors then attach rim hoists and angle brackets. – Attach inner joists to beam faces and add fasteners to joists. – Trim any excess wood all around. – If you chose unfinished wood it will have to be treated, sealed and varnished or painted.

How to build a small deck?

Preparation. The shed measures 10 x 14 ft,so I decided to make the deck on the whole front side,measuring 10 x 6 ft.

  • Marking. Next I needed to mark out where exactly the deck will to go.
  • Digging.
  • Ledger Board.
  • Hangers.
  • Notching Out.
  • Assembling.
  • Adding the Decking Boards.
  • Conclusion – Watch the Video.
  • How do you build a deck?

    To build a deck, first you’ll need to nail joist hangers in place on a ledger board and attach the board to your house. Then, you’ll have to cut the beam that will go opposite the ledger board to the same length, and attach corresponding joist hangers.

    What is a deck in construction?

    Deck (building) In architecture, a deck is a flat surface capable of supporting weight, similar to a floor, but typically constructed outdoors, often elevated from the ground, and usually connected to a building. The term is a generalization of decks as found on ships.

    author

    Back to Top