How much oil does a 4030 John Deere hold?
How much oil does a 4030 John Deere hold?
John Deere 4030 Engine
| Engine Detail | |
|---|---|
| John Deere | |
| Starter volts: | 12 |
| Oil capacity: | 17 qts 16.1 L |
| Coolant capacity: | 22 qts 20.8 L |
How much HP does a 4030 have?
John Deere 4030
| John Deere 4030 Power | |
|---|---|
| PTO (claimed): | 80 hp 59.7 kW |
| Drawbar (tested): | 67.03 hp 50.0 kW |
| PTO (tested): | 80.33 hp 59.9 kW |
| power test details … |
What is a John Deere synchro transmission?
The standard Synchro Shuttle transmission is a fully synchronized 4 forward /4 reverse speed electrohydraulic shuttle reverser transmission with permanent 4-wheel drive. It has the traditional “H” pattern gear sequence and was designed to provide smooth shiftability and modulation for shuttling.
How much horsepower does a 2955 John Deere have?
John Deere 2955
| John Deere 2955 Power | |
|---|---|
| Engine: | 97 hp 72.3 kW |
| PTO (claimed): | 85 hp 63.4 kW |
| Drawbar (tested): | 72.99 hp 54.4 kW |
| PTO (tested): | 86.22 hp 64.3 kW |
What Loader fits a John Deere 4030?
John Deere 4030 Attachments
| John Deere 148 Loader | |
|---|---|
| Loader weight: | 1350 lbs 612 kg |
| Breakout force (lift): | 4700 lbs 2131 kg |
| Lift to full height (at pin): | 3100 lbs 1406 kg |
| Bucket capacity: | 0.5 cu yd 0.4 cu m |
How does a John Deere CVT transmission work?
Once maximum engine power is reached and additional load is placed on the tractor, the IVT transmission will reduce speed enough to keep the motor at maximum power until the tough condition is over, then the transmission will increase the speed back up to the speed selected.
Where are John Deere 4030 tractors made?
The John Deere 4030 is a 2WD row-crop tractor from the Generation II series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1973 to 1977.
What kind of fuel tank does a John Deere 4030 have?
The JD 4030 is equipped with power steering; differential hydraulic wet disc brakes; open operator station, four-post Roll-Gard ROPS or Sound-Gard cab, and 132.5 liters (35 US gal.; 29.1 Imp. gal) fuel tank. The Deere 4030 could be equipped with the John Deere 148 loader.
What is the cylinder bore of a JD 4030?
The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 110.0 mm (4.33 in). The JD 4030 is equipped with power steering; differential hydraulic wet disc brakes; open operator station, four-post Roll-Gard ROPS or Sound-Gard cab, and 132.5 liters (35 US gal.; 29.1 Imp. gal) fuel tank.
