How much power can you get out of a 7MGTE?
How much power can you get out of a 7MGTE?
With the usual breathing mods, an uprated intercooler and fuel pump, bigger injectors, a metal head gasket, and an improved air-flow meter, with proper tuning, we would expect to achieve around 400 HP.
Is the 7MGTE a good engine?
The 7MGTE isn’t that great. It makes a butt load of torque, but revs to only like 5500 rpms or so, so it feels like a truck motor and not a performance engine. It is smooth, but the factory headgasket is prone to blow.
How much horsepower does a 7MGTE have?
7M-GTE. The turbocharged 7M-GTE was produced from 1986 to 1992. Output was 232 hp (173 kW; 235 PS) at 5,600 rpm and 344 N⋅m (254 lb⋅ft; 35.1 kg⋅m) at 3,200 rpm for most 5 psi (0.34 bar) versions. It was Toyota’s top performance engine until it was replaced by the JZ-series engines.
How much horsepower does a Supra mk3 have?
| Toyota Supra III 3.0i Turbo Engine Technical Data | |
|---|---|
| Aspiration : | Turbo |
| Compression Ratio : | 8.4 |
| Maximum power – Output – Horsepower : | 235 PS or 232 bhp or 173 kW @ 5600 rpm |
| Maximum torque : | 344 Nm or 253 lb.ft @ 3200 rpm |
How much power does a 7m GTE block hold?
The 7M-GTE block is very strong just like the 1JZ, but the bottom end can only hold around 400-500rwhp. This amount of power is plenty for a streetcar, but if you’re building a drag car or time attack car, you may need more power.
What kind of engine does a Toyota 7m GTE have?
It went over many changes over the years, but the most well-known version is the 7M-GTE. Every engine in the Toyota M series family is a straight-6 engine with overhead cams, although many of the earlier engines were single-overhead-cam, and they all use a cast-iron block with a cast-aluminum cylinder head.
What is the difference between the 7M-GE and the 7M-GTE?
This is completely different than the 7M-GE with is naturally aspirated. If you’re familiar with Toyota’s typical naming scheme, this shouldn’t come as much of a surprise. The 7M-GTE featured electronic fuel injection, which was just making its way into cars in the USA.
Why was the 7M-GTE only used in two cars?
As you can see from the list on the screen, the 7M-GTE was really only used in two vehicles. Once again this is because the 7M-GTE was a performance engine and Toyota doesn’t make that many performance cars at the time. Plus the 7M-GTE was pretty quickly replaced by the 1JZ.
