How much quikrete does it take to set a post?
How much quikrete does it take to set a post?
When you’re installing a fence post, the amount of concrete you need will be calculated based on the diameter of your fence post and how high the post is above ground. Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place.
How long does it take quikrete to set for fence post?
20 to 40 minutes
The concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
Will concrete resurfacer crack?
Water evaporates from the mix much faster when it’s really hot out. Extremely cold temperatures should be avoided because the water inside the resurfacing mix can freeze. When that happens the compound can crack and in some cases completely deteriorate. The best weather for resurfacing is 70 degrees and sunny.
How many bags of quikrete do I need for a 4×4 post?
When you account for the fence post what you need is 4 bags. The best way to determine the size of each fence post hole is: The diameter of the hole is 3 times the width of the fence post. The depth of the hole is 1/3 to 1/2 the above ground height of the fence post.
How many bags of cement do I need for a 4×4 post?
A six foot high fence post with a 4 inch post would need a hole that’s 36 inches deep by 12 inches in diameter. To fill a hole this size takes 5 bags of 80lb concrete, but remember, you have to subtract the volume of the post your burying….How Much Concrete For A 4×4 Fence Post?
| Depth | 50 Lb Bags |
|---|---|
| 24″30″ | 4 |
| 32″36″ | 5 |
How do you use Quikrete gravel posts?
Place 6 inches of gravel around base. Mix QUIKRETE® according to directions, and pour enough into hole to cover gravel, working it in and around gravel with shovel. Then fill the balance of the hole. Posts set with Fast-Setting Concrete will set in 20 minutes.
How do you make a fence post out of concrete?
Set the post into the hole and attach 2×4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.
Why choose Quikrete ® fast-setting concrete?
Set fence posts or mailbox posts without mixing! Whether you are building a new fence, setting a mailbox or anchoring a basketball goal or play set, QUIKRETE ® Fast-Setting Concrete is the ideal product for the job.
What isquikrete ® re-cap ® concrete resurfacer?
QUIKRETE ® RE-CAP ® Concrete Resurfacer provides an easy and affordable alternative to removing and replacing existing old, spalled driveways, patios, sidewalks and other exterior residential or commercial concrete slabs.
