How much torque does a Harley 110 have?
How much torque does a Harley 110 have?
Performance. The 110 generates 115 foot-pounds of torque and displaces 1,802.6 cc of volume during a combustion cycle. It has compression ratio of 9.151:1 and an overhead valve configuration.
How much horsepower does a stock 103 Harley have?
The stock Horsepower rating is around 64 peak horsepower. On the lower RPMs, where you will usually ride, it has around 45-55 Horse Power.
How much horsepower does a Harley 110 have?
On the horsepower side, the Twin Cam 110 churns out 80 hp from 4700 rpm to 5400 rpm. As mentioned, around 5800 rpm, everything flat lines. Soft tail Slim S put up peak torque numbers of 96.79 lb-ft @ 3600 rpm and 81.74 hp @ 5000 rpm.
How much power does a 110cc motorcycle make?
Another understatement. In their purely stock form these big-inch/low-compression factory 110s will struggle to get past much more than 95 hp, tops, and maybe 95 pound-feet of torque, both numbers rapidly falling away at anything much above 4,000 rpm. That’s hardly the sort of performance you’d expect from this displacement.
What is the compression ratio of a Harley Davidson 110 motor?
Peruse the spec sheet for a 2016-model 110 motor and you’ll find the compression ratio listed at a paltry 9.2:1. “And it’s killing these engines,” Jason says.
How much horsepower does a twin cam 110 make?
On the horsepower side, the Twin Cam 110 churns out 80 hp from 4700 rpm to 5400 rpm. As mentioned, around 5800 rpm, everything flat lines. The amount of power that can be put out by these particular models is like most Harleys limited only by cash flow.
How much torque does a stage I 110 motor have?
JMHO. The 2007 P&A catalog shows the Stage I 110″ kit and claims it’s the same motor as the CVO Screamin Eagle bikes. The dyno chart for that kit shows 95 ft. lbs torque max @ 3500 rpm; and it falls rapidly after after 4000 rpm.
