How to change Heska fluid pump from micro to macro?
How to change Heska fluid pump from micro to macro?
MACRO-Allows fluid rate to be set from 1-999 mls/hour. In order to choose macro or micro, the pump needs to be off. While you are holding the SELECT button, turn the unit on then lift your finger off the SELECT button. Now pushing SELECT will allow you to choose macro or micro.
What is the maximum default setting rate for a syringe pump?
7635 ml/hr
It is recommended that you use syringes 0.5µm to 60cc in size. The pump can hold a syringe up to 140 cc, but can only open up to about 120 cc lengthwise. The exception is the SP-1800, which can hold syringes up to 10cc….Syringe Pump FAQ.
| Model | Maximum Rate |
|---|---|
| SP510 / SP511 | 7635 ml/hr with a 60 cc syringe |
How do you close an IV drip?
Make sure that the drip chamber is half filled. Once it is half filled, let the fluid in the IV flow until it reaches the end of the line (this is to remove any air bubbles are are trapped in the line). Close the flow control when the fluid reaches the end. To “close” you will use the control valve to clamp the tube.
How do infusion pumps work?
Infusion pumps may be powered electrically or mechanically. In an elastomeric pump, fluid is held in a stretchable balloon reservoir, and pressure from the elastic walls of the balloon drives fluid delivery. In a peristaltic pump, a set of rollers pinches down on a length of flexible tubing, pushing fluid forward.
How do you unlock the Alaris pump?
Alaris® System Press and hold the Tamper Resistance Control on the rear of the Alaris PC unit for three seconds. 2. When the keypad is unlocked, a PANEL UNLOCKED prompt displays on the main screen of the Alaris PC unit. The PANEL UNLOCKED prompt remains on the screen for three seconds.
How do you use a Heska pump?
Using clamp, remove the air from the line and then close clamp. On Heska pump, attach hook and swivel bolt together and attach to pump. Attach plug to unit and plug into to nearest outlet. Calculate fluid rate per hospital protocol.
How do I choose between a macro or micro pump?
In order to choose macro or micro, the pump needs to be off. While you are holding the SELECT button, turn the unit on then lift your finger off the SELECT button. Now pushing SELECT will allow you to choose macro or micro. Use the MACRO choice with a macrodrip venoset.
Why choose the Heska® vet/IV?
Find out why thousands of customers love HESKA® VET/IV 2.2 Infusion Pump. Weighing only 2.6 pounds, the Vet/IV Pump supports three pressure settings and can be programmed for very small to very large volumes with rate and time or rate and volume to be infused.
Why choose Heska diagnostic lab?
Secure your spot for September 16th! The Heska diagnostic laboratory suite provides rapid and reliable results. We are extremely satisfied with the efficient software integration, service, and ultimately increased profitability. Stop overpaying for in-clinic blood testing and analysis.
