How to setup TP-Link TL WA500G?
How to setup TP-Link TL WA500G?
How do I configure TL-WA501G, TL-WA5110G, TL-WA500G, TL-WA601G to Point to Point Bridge mode?
- Connect your computer to a AP with the hard wired connection, and then log into the Web-based Interface by entering the IP address 192.168.
- Change the LAN IP address of the access point to avoid IP conflict if necessary.
How do I connect my tp-link router to an existing router?
Select Wireless->Wireless Settings on the left side, enter a SSID for the name of the wireless network and select a channel. Save and reboot the router. Connect your computer to the other wireless router, and repeat the Step 1 and step 2, after reboot both of the two routers, the wireless connection will be set up.
How do I log into my TP Link range extender?
Launch a web browser and type http://tplinkrepeater.net or IP (192.168. 0.254 by default) in the address field, then press the “Enter” button. 4. Type in username/password to log in.
How do I set up the tl-wa500g access point?
1. Conn ect the Cable or DSL modem to a Router. 2. Locate an optimum location for the AP. The best pl ace is usually near the center of the area in which your PC (s) will wirelessly connect. 3. Adjust the direction of the antenna. Normally, upright is a good direction. 4. Conn ect the Ethernet Broadband Router to t he TL-WA500G Access Point.
How to fix tl-wa500g can’t update wireless statics?
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade. Fix a bug that when clients disconnect improperly,the AP can not update the wireless statics list and can not accept more than 64 clients. For TL-WA500G V1.
What do the LEDs on the tl-wa500g mean?
Viewed from left to right, the TL-WA500G has four status LEDs: Power, System, LAN and WLAN. The LEDs’ explanation above shows the devic e’s working status after initialization. Viewed from left to right, the following parts are located on the rear panel of TL-WA500G.
How to upgrade firmware of TP-Link device?
A firmware update can resolve issues that the previous firmware version may have and improve its current performance. Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
