Is Cutek CD50 water based?

Is Cutek CD50 water based?

Description. CUTEK® Extreme CD50 is a high-performance, oil-based wood stabiliser with a unique self healing effect. Penetrating deeply into timber, CUTEK® Extreme CD50 highlights the natural grain and beauty of wood whilst providing robust and long-lasting protection.

How long does it take Cutek to dry?

2-3 days
Once applied, CUTEK® Wood Preservative generally requires 2-3 days of dry conditions after coating to facilitate full penetration/diffusion and an even colour finish; so check your weather forecast before coating.

How long does Cutek decking oil take to dry?

A second coat should be applied when the first coat is dry, which may be up to 72 hours or even longer depending on weather conditions. If the first coat took more than 72 hours to dry, apply a thinner coat the second time.

Can you paint over Cutek?

Cutek Extreme will not penetrate through other oils or stains as they represent a barrier to penetration. All oils, stains, paints and other films must be fully removed before Cutek Extreme is applied.

Can I use Cutek on treated pine?

CUTEK® Extreme CD50 or CUTEK® Wood Preservative can be used straight on pre-treated pine without using a preparation treatment first. CUTEK® Wood Stripper will also prepare the timber and allow the treatment oil to penetrate and do its job.

How long does CD50 last?

Reapply CD50 as necessary to retain the appearance of the timber. Reapplication time is from 2 to 6 years – this depends on the timber type, porosity and exposure to weather and sunlight. Where UV exposure is extreme e.g. coastal and fully exposed conditions, reapplication times may be reduced accordingly.

How long after oiling a deck can you walk on it?

How long after oiling a deck can you walk on it? For most water based decking oils, you’ll need to wait at least 3 hours before you can walk on your deck after oiling it. If you use an oil based coating then you’ll need to wait longer for it to dry.

Can I paint over CD50?

CD50 products cannot be applied over another coating, as they must be free to penetrate inside the timber. Old failed coatings can be removed to restore timber back to its original timber character and colour.

Is Intergrain better than cabots?

From Cabot’s comes Intergrain UltraDeck, a water based, highly durable penetrating oil designed to protect the natural look of timber. Emitting signficantly less VOCs than oil based coatings, Intergrain products are more environmentally responsible as well as high performance.

What is the best timber for decking in Australia?

Hardwoods Hardwoods are a great option for Australian decks – they’re extremely durable, highly resilient and can look, feel and even smell great. Popular hardwoods include Jarrah, Spotted Gum, and Merbau, which is the most common timber decking in Australia.

Can you paint over CD50?

What is CD50 oil?

Categories: Automotive, Heavy Duty & Commercial. Bel-Ray® Synthetic Transmission CD 50 is a full synthetic, SAE 50 transmission lubricant for use in heavy duty manual transmissions. It is designed for extended drain and severe service in heavy-duty manual transmissions.

Where is cutek® extreme CD50 made?

CUTEK® Extreme CD50 is made in Australia for Australian conditions. CUTEK® Extreme CD50 diffuses throughout wood to control liquid and gas phase moisture, to minimise warping, cupping and splitting. By improving the dimensional stability of wood, CUTEK® Extreme CD50 improves the service life of your timber.

How much do cutek products cost?

Cutek Colourtone (to tint Cutek products) $16.50inc GST Cutek Wood Preservative – Clear $199.95– $369.20each You may also like… Cutek CD50 Extreme – Premium Timber Protection Oil $45.00– $328.70each

Why does my cutek® extreme CD50 stain my timber Green?

CUTEK® Extreme CD50 contains a small amount of copper salts that may impart a faint green hue on some very light or white coloured timbers. This is more likely to occur in internal applications or in areas not exposed to UV light.

What is cutcutek extreme?

Cutek Extreme comes in a clear finish. This means you can apply it “as is” to timbers that you would like to go a natural grey colour but still protect the timber from the elements. We also carry a full range of colourtones with added UV protection to maintain the beautiful colour of your timber.