Is FLUID FILM a good lubricant?

Is FLUID FILM a good lubricant?

FLUID FILM is an all purpose chain lube due to its non-solvent application. Spray FLUID FILM directly on the chain, wiping off excess with a clean rag. FLUID FILM will migrate into all areas, providing long-lasting lubrication and protection from rust. Great on bicycle chains as well.

Is FLUID FILM a good product?

Since Fluid Film works so good as a rust preventive. I use it to coat the underside of my truck frame and apply a good amount to the trailer hitch assembly… While it has always done an excellent job of preventing rust I did have an issue when unhooking from a snowmobile trailer and having the hitch freeze to the ball.

Is FLUID FILM undercoating any good?

I use FLUID FILM as an undercoating and have been very impressed with the performance. It is so good that it’s hard to wash off, even with a pressure washer. It leaves a waxy film that is unaffected by road salt and it works great in hard to reach areas like inside doors and steel brake lines.

Is FLUID FILM slippery?

Yes, it leaves a slippery film on a surface that does not dry out which is the point for adequate protection. You may find it necessary to wipe off (where maintenance is required) and then re-applied, for example for suspension work.

How much does it cost to fluid film?

Fluid Film is best applied in the fall, before winter arrives, and our rates start at $150 for small cars and go up to $200+ for large and extra large vehicles. For $150/year, you can’t beat this kind of protection!

How often do you apply Fluid Film?

Fluid Film is a lanolin based fluid that never dries and is self-healing. If sprayed on the undercarriage of a vehicle, it needs to be reapplied once per year, preferably in Spring. Heat helps it flow better. If applied inside of doors and in rocker panels, it usually lasts more than one year.

How much does it cost to have Fluid Film undercoating?

Does Fluid Film ruin rubber?

Will Fluid Film harm rubber or plastic? A. It has no adverse effect on plastic or synthetic rubber, but it may cause some swelling on natural rubber.

How often should you apply Fluid Film?

How much does it cost to Fluid Film?

Is fluid film any good?

Fluid Film is an excellent way to protect battery terminals and being non-conductive, will not harm electrical connections. Ensure you make the connections before applying. The non-drying characteristics of Fluid Film will provide long term protection in these applications.

Who uses fluid film?

Bicycle & Motorcycle Chains Use FLUID FILM to lubricate bottom brackets, derailleur, headseats, hubs, seat posts, nuts and bolts, gears, levers and brake cables. FLUID FILM is also an excellent chain lube. Spray on a light coat then wipe off excess.

What is PTFE lubricant used for?

In industrial applications, owing to its low friction, PTFE is used for plain bearings, gears, slide plates, seals, gaskets, bushings, and more applications with sliding action of parts, where it outperforms acetal and nylon.

What is a fluid film?

Fluid film keeps parts rust-free and moving freely. Fluid Film is a solvent-free, lanolin-based rust/corrosion preventive and lubricant that provides long term protection and lubrication for all metal surfaces.