Is it OK to use a universal catalytic converter?

Is it OK to use a universal catalytic converter?

We recommend getting a direct-fit catalytic converter if your vehicle has an exhaust system that is still factory-fitted or OEM-styled. Universal converters do require any modifications to the system, but are made to fit a wide range of applications. These converters are generally cheaper than direct-fit converters.

How long do MagnaFlow catalytic converters last?

How long do Magnaflow catalysts last? It makes a roundabout for up to five years with a conventional catalytic converter.

Does a MagnaFlow catalytic converter increase horsepower?

There’s no one-size-fits-all answer to this question. The amount of horsepower you will get from a high flow catalytic converter depends on your engine and the modifications you have made to it. You may see a horsepower gain of as little as 5 hp or as much as 60 hp. You may also get an extra 5-60 ft lbs of torque.

How good are aftermarket catalytic converters?

money. An aftermarket catalytic converter can save you over 80% on the price of a new one, costing less than $200, and sometimes as low as $60. However, there are significant downsides in purchasing aftermarket, and you should be aware of them before making your decision.

Can you put aftermarket catalytic converter on any car?

CARB-compliant aftermarket replacement converters are required for California Emissions Certified vehicles, model years 2001 and newer, operated in the state. EPA-compliant converters may be used on vehicles from model years 2000 and older, OR all Federal/EPA-only Emissions Certified vehicles, regardless of model year.

Does magnaflow void warranty?

Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.

Are MagnaFlow cats any good?

Magnaflow in our opinion is one of the best performance and replacement catalytic converters because they not only perform as well as catalytic converter from your dealer for a fraction of the cost, but they have a generous warranty.

How much horsepower does Magnaflow exhaust add?

MagnaFlow, an aftermarket exhaust manufacturer, says that its customers can expect horsepower gains of around 10 percent (which is a pretty commonly-quoted figure).

What is the bad catalytic converter symptoms?

Rattling noises from under the vehicle are another symptom of a bad or failing catalytic converter. If a catalytic converter becomes old or damaged internally from excessively rich fuel mixtures, the catalyst coated honeycomb meshes on the inside of the converter can collapse or break apart, causing a rattle.

How to install a catalytic converter?

Raise the vehicle and secure it on jack stands. Make sure to raise the vehicle enough to give space for maneuvering underneath the vehicle.

Find the catalytic converter. Identify the catalytic converter on the underside of the vehicle.

Remove any oxygen sensors. If required,remove any oxygen sensors that may be mounted directly in or near the catalytic converter.

Spray penetrating oil. Spray penetrating oil on the exhaust flange hardware and flanges,and allow them a few minutes to soak.

Prepare your tools. Identify what size sockets or wrenches are required to remove the catalytic converter flange nuts or bolts.

Replace the catalytic converter. Replace the catalytic converter with a new one,and replace any exhaust flange gaskets to prevent exhaust leaks.

Install the catalytic converter. Install catalytic converter using the reverse of the removal procedure,steps 1-5.

How to replace the catalytic converter?

Raise the vehicle,preferably at both the front and rear,high enough for you to slide underneath and work comfortably.

Disconnect and remove the O2 sensors from the catalytic converter. Most cars built after 1996 will have one sensor before the converter and another after it.

Remove the bad catalytic converter. Depending on whether it’s OEM or not and/or how old the car is,it may be welded in,it may be welded on one

Using a sanding block or gasket cleaner on a drill,thoroughly clean the flanges on the manifold/muffler/exhaust pipe if so equipped.

Remove the rest of the exhaust and hangers that need replacement.

Compare the pipe sizes of the new converter and the existing pipe.

Install any new exhaust pipes prior to installing the new catalytic converter. Don’t forget new gaskets.

Making sure you get flow direction correct and install new donut gaskets,install the new converter.

Start the engine and check for leaks. Admire your work. Have you ever replaced a catalytic converter?